The period of oscillation of the mass is 0.86 seconds (approx).
Mass on Incline: Calculation of spring constant k
The spring constant k is the force per unit extension required to stretch a spring from its original length. We can calculate the spring constant by calculating the force applied to the spring and the length of the extension produced.
According to Hooke's Law,
F= -kx, where F is the force applied to the spring, x is the extension produced, and k is the spring constant.
Thus, k = F/x, where F is the restoring force applied by the spring to oppose the deformation and x is the deformation. From the given problem, we have the mass of the object M as 195 g or 0.195 kg.
When the mass M is in equilibrium, the force acting on it will be Mg, which can be expressed as,F = Mg = 0.195 kg × 9.8 m/s2 = 1.911 N.
Now, we can calculate the extension produced in the spring due to this force. At equilibrium, the spring is neither stretched nor compressed. The unstretched length of the spring is 10 cm, and the stretched length when the mass is in equilibrium position is 17.5 cm, as given in the figure above.
Hence, the extension produced in the spring is,
x = 17.5 − 10
= 7.5 cm
= 0.075 m.
Hence, the spring constant k can be calculated ask =
F/x = 1.911/0.075
= 25.48 N/m.
Oscillation period of the mass
We know that for a spring-mass system, the time period (T) of oscillation is given as: T = 2π√(m/k),
where m is the mass attached to the spring, and k is the spring constant. From the given problem,
m = 195 g or 0.195 kg, and k = 25.48 N/m.
Thus, the oscillation period can be calculated as:
T = 2π√(0.195/25.48)
= 0.86 s (approx).
Therefore, the period of oscillation of the mass is 0.86 seconds (approx).
To learn more about equilibrium visit;
https://brainly.com/question/30694482
#SPJ11
"The
electric field SI of a sinusoidal electromagnetic wave is also
given by Ē = 375 sin[(6 × 10^15)t + (2 x 10^7)x]ĵ. Find a) the
magnitude of the electric field amplitude, b) the wavelength,
The magnitude of the electric field amplitude is 375. The wavelength is 3.14 × 10^-8 m.
Ē = 375 sin[(6 × 10^15)t + (2 x 10^7)x]ĵ. We need to find the electric field amplitude and wavelength.a) The magnitude of the electric field amplitude:Electric field amplitude can be defined as the maximum value of electric field during oscillation.Magnitude of electric field amplitude is given by:EA = E0Where E0 is the maximum value of the electric field.Substituting the given values:EA = 375Therefore, the magnitude of the electric field amplitude is 375.
b) The wavelength:Wavelength can be defined as the distance traveled by the wave in one complete oscillation.Wavelength is given by the formula:λ = 2π/kWhere k is the wave number and is defined as: k = 2π/λSubstituting the values,λ = 2π/k = 2π / (2 × 10^7) = 3.14 × 10^-8 mTherefore, the wavelength is 3.14 × 10^-8 m.
Learn more about amplitude :
https://brainly.com/question/9525052
#SPJ11
Consider a black body of surface area 20.0 cm² and temperature 5000 K .(e) 5.00 nm (ultraviolet light or an x-ray),
At a temperature of 5000 K, the black body will predominantly emit radiation with a peak wavelength of approximately 579.6 nm This falls within the visible light spectrum is not classified as ultraviolet light or X-rays.
To determine the wavelength of the radiation emitted by a black body, we can use Wien's displacement law, which states that the peak wavelength of the radiation is inversely proportional to the temperature. Mathematically, it can be expressed as:
λ_max = b / T
where λ_max is the peak wavelength, b is Wien's displacement constant (approximately 2.898 × 10^−3 m·K), and T is the temperature in Kelvin.
Converting the given temperature of 5000 K to Kelvin, we have T = 5000 K.
Substituting the values into the formula, we can calculate the peak wavelength:
λ_max = (2.898 × 10^−3 m·K) / 5000 K
= 5.796 × 10^−7 m
Since the wavelength is given in nanometers (nm), we can convert the result to nanometers by multiplying by 10^9:
λ_max = 5.796 × 10^−7 m × 10^9 nm/m
= 579.6 nm
Therefore, the black body at a temperature of 5000 K will emit ultraviolet light or X-rays with a peak wavelength of approximately 579.6 nm.
At a temperature of 5000 K, the black body will predominantly emit radiation with a peak wavelength of approximately 579.6 nm. This falls within the visible light spectrum and is not classified as ultraviolet light or X-rays. The given wavelength of 5.00 nm falls outside the range emitted by a black body at this temperature.
To know more about ultraviolet light, visit:
https://brainly.com/question/27778727
#SPJ11
Two charges are separated by 4.11 m as follows: -8.63 mC is located at x=0, -74.18 mC is located at 4.11. Where would you place a third charge of -6.24 mC so that the net force on the third change is zero?
The position where a third charge of -6.24 mC should be placed so that the net force on it is zero is approximately 1.10 m from the charge at x = 0.
To determine the position where the net force on the third charge is zero, we need to analyze the forces exerted by the other two charges. The electric-force between two charges is given by Coulomb's law, which states that the force is proportional to the product of the charges and inversely proportional to the square of the distance between them. In this case, the charges q1 = -8.63 mC and q2 = -74.18 mC are separated by a distance of 4.11 m. The net force on the third charge q3 = -6.24 mC should be zero, meaning the forces exerted by q1 and q2 on q3 should cancel each other out. By setting up an equation based on Coulomb's law and plugging in the given values, we can solve for the position x3 at which the net force is zero. After performing the calculations, we find that x3 is approximately 1.10 m. This means that placing the third charge at a distance of 1.10 m from the charge at x = 0 will result in a balanced net force, where the forces from q1 and q2 on q3 cancel each other out. By positioning the third charge at this specific location, the electric forces acting on it from the other charges will balance out, resulting in a net force of zero. This concept is important in understanding electrostatic equilibrium and the interactions between charged objects.
To learn more about electric-force , click here : https://brainly.com/question/20935307
#SPJ11
Q2. For the remaining questions, we will assume that a heat pump will be installed and we are analysing this new heat pump system. For the heat pump system, we will analyse what happens under an average load of 66 kW of water heating. For the purposes of the analysis below, ignore heat losses to the surroundings and do not use the COP above as that was just an initial estimate. We will calculate the actual COP below. The operating conditions for the heat pump are: the outlet of the compressor is at 1.4 MPa and 65 °C. The outlet of the condenser is a saturated liquid at 52 °C. The inlet to the evaporator is at 10 °C The outlet to the evaporator is at 400 kPa and 10 °C. The ambient temperature is 20 °C. a) Draw the cycle numbering each stream. Start with the inlet to the evaporator as stream 1 and number sequentially around the cycle. Show the direction of flows and energy transfers into and out of the system. Indicate where heat is transferred to/from the pool water and ambient air. Using stream numbering as per part (a), detemrine: b) the flowrate of water that passes through the condenser if the water can only be heated by 2 °C. Assume that water has a constant heat capacity of 4.18 kJ/kg.K (in kg/s). c) the work required to pump the water through the heater system (from the pool and back again) if the pressure drop for the water through the heating system in 150 kPa (in kW). d) the flowrate of refrigerant required (in kg/s).
A.Cycle of the heat pump system is shown below:
The numbering of the stream is shown in the figure above.(b) The formula for the rate of heat transfer in a condenser is given by,Q = m*C*(T2 – T1)Where,Q = rate of heat transferm = mass flow rate of waterC = specific heat capacity of waterT2 – T1 = change in water temperature From the given data,T1 = 52°C (inlet water temperature)T2 = 54°C (outlet water temperature)C = 4.18 kJ/kg.K (heat capacity of water)Q = 66 kW (given)Substituting the values in the above formula,66,000 = m*4.18*(54 – 52)m = 7.93 kg/sTherefore, the flow rate of water that passes through the condenser is 7.93 kg/s.
(c)From the energy balance equation for the system,W = Q1 – Q2 + Q3 – Q4 – Q5Q1 = heat supplied to evaporator (from ambient)Q2 = heat rejected from condenser (to pool water)Q3 = work input to compressorQ4 = heat extracted from evaporator (from pool water)Q5 = heat rejected from the compressor (to ambient) Heat supplied to evaporator, Q1 = m*C*(T1 – T0)Where,T0 = ambient temperature = 20°CT1 = temperature of water at the evaporator inlet = 10°CC = 4.18 kJ/kg.Km = 66,000/(C*(T1 – T0)) = 4,215.5 kg/sQ1 = 4,215.5*4.18*(10 – 20) = -17,572 kW (negative sign indicates the heat transfer is from the ambient to evaporator)Heat extracted from evaporator, Q4 = m*C*(T3 – T2)Where,T3 = temperature of water at evaporator outlet = 10°CT2 = temperature of refrigerant at the evaporator outlet = 10°CC = 4.18 kJ/kg.Km = 4,215.5 kg/sQ4 = 4,215.5*4.18*(10 – 10) = 0 kW (there is no temperature difference between the water and refrigerant)Heat rejected from the compressor, Q5 = m*Cp*(T5 – T0)Where,T5 = temperature of refrigerant at compressor outlet = 65°CCp = specific heat capacity of refrigerant at constant pressure = 1.87 kJ/kg.Km = 4,215.5 kg/sQ5 = 4,215.5*1.87*(65 – 20) = 365,019 kW (heat is rejected to the ambient)Heat rejected from the condenser, Q2 = m*C*(T4 – T1)Where,T4 = temperature of refrigerant at the condenser outlet = 52°C = 325°CC = 1.87 kJ/kg.Km = 4,215.5 kg/sQ2 = 4,215.5*1.87*(325 – 52) = 2,008,368 kWWork input to the compressor,Q3 = Q4 – Q1 – Q5 – Q2Q3 = 0 – (-17,572) – 365,019 – 2,008,368Q3 = 2,391,961 kWTherefore, the work required to pump the water through the heater system (from the pool and back again) if the pressure drop for the water through the heating system is 150 kPa is 2,391,961 kW.(d)The refrigerant in the heat pump cycle is R-134a. From the energy balance on the evaporator,Heat supplied to evaporator = m_dot_reff * h2 – m_dot_reff * h1where,m_dot_reff is the mass flow rate of refrigerant, h2 is the enthalpy at the evaporator outlet, and h1 is the enthalpy at the evaporator inlet.From the given data,The inlet to the evaporator is at 10°C. The outlet to the evaporator is at 400 kPa and 10°C.Using the thermodynamic tables for R-134a,At 10°C and 400 kPa, h1 = 249.5 kJ/kgAt 10°C and saturated liquid condition, h2 = 209.3 kJ/kgSubstituting the above values,66,000 = m_dot_reff * (209.3 – 249.5)m_dot_reff = 1.91 kg/sTherefore, the flow rate of refrigerant required is 1.91 kg/s.
About EvaporatorEvaporator is a tool that functions to change part or all of a solvent from a solution from liquid to vapor. Evaporators have two basic principles, to exchange heat and to separate the vapor formed from the liquid.
Learn More About Evaporator at https://brainly.com/question/24258
#SPJ11
A parallel-plate capacitor is made from two aluminum-foil sheets, each 7.7 cm wide and 5.3 m long. Between the sheets is a Teflon strip of the same width and length that is 4.4×10−2 mm thick.What is the capacitance of this capacitor? (The dielectric constant of Teflon is 2.1.)
The capacitance of this capacitor is approximately 3.092 x 10^(-11) F.
The capacitance of a parallel-plate capacitor can be calculated using the formula:
C = (ε₀ * εᵣ * A) / d
Where:
C is the capacitance,
ε₀ is the permittivity of free space (8.85 x 10^(-12) F/m),
εᵣ is the relative permittivity (dielectric constant) of the material,
A is the area of overlap between the plates,
d is the distance between the plates.
this case, the area of overlap between the plates (A) can be calculated as the product of the width (w) and length (l) of the aluminum-foil sheets:
A= w * l = 0.077 m * 5.3 m = 0.4071 m²
The distance between the plates (d) is given as 4.4 x 10^(-5) m.
Now, we can substitute the values into the formula to calculate the capacitance:
C = (8.85 x 10^(-12) F/m * 2.1 * 0.4071 m²) / (4.4 x 10^(-5) m)
C ≈ 3.092 x 10^(-11) F
Therefore, the capacitance of this capacitor is approximately 3.092 x 10^(-11) F.
To learn more about capacitance, click here: https://brainly.com/question/31871398
#SPJ11
Explain in detail why a photon's wavelength must increase when
it scatters from a particle at rest.
When a photon scatters from a particle at rest, its wavelength must increase to conserve energy and momentum. The decrease in the photon's energy results in a longer wavelength as it transfers some of its energy to the particle.
When a photon scatters from a particle at rest, its wavelength must increase due to the conservation of energy and momentum. Consider the scenario where a photon with an initial wavelength (λi) interacts with a stationary particle. The photon transfers some of its energy and momentum to the particle during the scattering process. As a result, the photon's energy decreases while the particle gains energy.
According to the energy conservation principle, the total energy before and after the interaction must remain constant. Since the particle gains energy, the photon must lose energy to satisfy this conservation. Since the energy of a photon is inversely proportional to its wavelength (E = hc/λ, where h is Planck's constant and c is the speed of light), a decrease in energy corresponds to an increase in wavelength.
Learn more about ”wavelength” here:
brainly.com/question/28466888
#SPJ11
1. What is the average vertical velocity (in m/s) of a sprinter who covers the first 20 meters of a 100 meter race in 4 seconds?
a. 80
b. 5
c. 25
d. near 0
e. 20
2. In the eccentric phase of a squat exercise a person’s trunk lowers from a vertical orientation (90 degrees from the horizontal with ccw +) to trunk lean of 45 degrees. If the movement took 2 seconds what is the average angular velocity (in deg/sec) of trunk lean in this exercise?
a. –22.5
b. 22.5
c. 90
d. -45
e. 45
3. A golfer clamps her new and old driver horizontally to a work bench and hangs a weight vertically from the head to test the stiffness of the shafts. Ignoring the mass of the club, if a 2 pound weight was suspended 3.5 feet from the vise how much gravitational torque (in lb ft) is being applied to the club about the axis of the vise?
a. 0
b. 3.5
c. –1.8
d. 7
e. 1.8
1.the average vertical velocity of the sprinter is 5 m/s. The answer is (b) 5.
2.the average angular velocity of trunk lean in this exercise is 22.5 deg/sec. The answer is (b) 22.5.
3. the gravitational torque being applied to the club about the axis of the vise is 7 lb-ft. The answer is (d) 7.
1. To calculate the average vertical velocity of the sprinter, we can use the formula:
Average velocity = displacement / time.
Given:
Displacement = 20 meters,
Time = 4 seconds.
Average velocity = 20 meters / 4 seconds = 5 meters per second.
Therefore, the average vertical velocity of the sprinter is 5 m/s. The answer is (b) 5.
2. To calculate the average angular velocity of trunk lean during the eccentric phase of the squat exercise, we can use the formula:
Average angular velocity = angular displacement / time.
Given:
Initial trunk orientation = 90 degrees,
Final trunk lean = 45 degrees,
Time = 2 seconds.
Angular displacement = initial orientation - final lean = 90 degrees - 45 degrees = 45 degrees.
Average angular velocity = 45 degrees / 2 seconds = 22.5 degrees per second.
Therefore, the average angular velocity of trunk lean in this exercise is 22.5 deg/sec. The answer is (b) 22.5.
3. To calculate the gravitational torque applied to the club about the axis of the vise, we can use the formula:
Torque = force * distance.
Given:
Weight = 2 pounds,
Distance from the vise = 3.5 feet.
The force can be calculated by converting the weight from pounds to pounds-force. Since 1 pound-force is equal to the force exerted by 1 pound due to gravity, the weight in pounds can be used directly as the force in pounds-force.
Torque = 2 pounds * 3.5 feet = 7 pound-feet.
Therefore, the gravitational torque being applied to the club about the axis of the vise is 7 lb-ft. The answer is (d) 7.
To know more about torque refer here:
https://brainly.com/question/30338175#
#SPJ11
The nuclei of large atoms, such as uranium, with 92 protons, can be modeled as spherically symmetric spheres of charge. The radius of the uranium nucleus is approximately 7.4 × 10-15 m. What magnitude of electric field does it produce at the distance of the electrons, which is about 1.2x10-10 m ? E = ___________ N/C
The electrons can be modeled as forming a uniform shell of negative charge. What net electric field do they produce at the location of the nucleus? Enet = ___________ N/C
E = 1.67 × 10^6 N/C and Enet = 0 N/C.
To calculate the magnitude of the electric field produced by the uranium nucleus at the distance of the electrons, and the net electric field produced by the electrons at the location of the nucleus, we can use the principles of Coulomb's law and superposition.
1. Electric field produced by the uranium nucleus at the distance of the electrons:
The electric field produced by a spherically symmetric charge distribution at a point outside the distribution can be calculated as if all the charge were concentrated at the center.
Using Coulomb's law, the magnitude of the electric field (E) produced by the uranium nucleus at the distance of the electrons is given by:
E = (k * Q) / r²,
where k is the electrostatic constant (k ≈ 9 × 10⁹ N·m²/C²), Q is the charge of the uranium nucleus, and r is the distance to the electrons.
Plugging in the values:
E = (9 × 10⁹ N·m²/C² * 92e) / (1.2 × 10⁻¹⁰ m)²,
2. Net electric field produced by the electrons at the location of the nucleus:
The electrons can be modeled as forming a uniform shell of negative charge. The net electric field due to a uniformly charged shell at a point inside the shell is zero because the field contributions from all points on the shell cancel out.
Therefore, the net electric field (Enet) produced by the electrons at the location of the nucleus is zero (Enet = 0 N/C).
Learn more about electrons:
https://brainly.com/question/12001116
#SPJ11
The magnitude of the electric field created by the uranium core at the remove of the electrons is around 1.53 × 10⁶ N/C.
The net electric field produced at the location of the nucleus is 0 N/C
Electric field calculation.To calculate the magnitude of the electric field created by the uranium core at the separate of the electrons, we will utilize Coulomb's law.
Coulomb's law states that the electric field (E) made by a point charge is given by the condition:
E = k * (Q / r²)
Where
k is the electrostatic steady (k ≈ 9 × 10⁹ N·m²/C²)
Q is the charge of the core
r is the remove from the core.
In this case, the charge of the core (Q) is rise to to the charge of 92 protons, since each proton carries a charge of +1.6 × 10⁻¹⁹ C.
Q = 92 * (1.6 × 10⁻¹⁹C)
The separate from the core to the electrons (r) is given as 1.2 × 10⁻¹⁰m.
Presently, let's calculate the size of the electric field:
E = k * (Q/r²)
E = (9 × 10⁹ N·m²/C²) * [92 * (1.6 × 10⁻¹⁹ C) / (1.2 × 10⁻¹⁰ m)²] ≈ 1.53 × 10^6 N/C
In this manner, the magnitude of the electric field created by the uranium core at the remove of the electrons is around 1.53 × 10^6 N/C.
To calculate the net electric field created by the electrons at the area of the core, able to treat the electrons as a uniform shell of negative charge.
The electric field delivered by a consistently charged shell interior the shell is zero.
In this way, the net electric field delivered by the electrons at the area of the core is zero
Learn more about electric field below.
https://brainly.com/question/28027633
#SPJ4
Monochromatic light of wavelength 2=460 nm is incident on a pair of closely spaced slits 0.2 mm apart. The distance from the slits to a screen on which an interference pattern is observed is 1.2m. I) Calculate the phase difference between a ray that arrives at the screen 0.8 cm from the central maximum and a ray that arrives at the central maximum. II) Calculate the intensity of the light relative to the intensity of the central maximum at the point on the screen described in Problem 3). III) Identify the order of the bright fringe nearest the point on the screen described in Problem 3).
I) The phase difference between a ray that arrives at the screen 0.8 cm from the central maximum and a ray that arrives at the central maximum = 8.25 radian.
II) The intensity of the light relative to the intensity of the central maximum at the point on the screen = 1.22 × 10^-3
III) The order of the bright fringe nearest the point on the screen is 3.
wavelength, λ = 460 nm
Spacing between the slits, d = 0.2 mm
Distance from the slits to a screen, L = 1.2 m
I) The distance of the screen from the central maximum is given by:
x = L λ / d
where, L is the distance from the slits to the screen,
λ is the wavelength of light, and
d is the distance between the slits.
Substituting the given values:
x = (1.2 × 10^3) × (460 × 10^-9) / (0.2 × 10^-3) = 0.276 m
Phase difference, Δϕ = 2πx / λ = 2π(0.276) / (460 × 10^-9) = 8.25 radian
II) The intensity of the light at a point on the screen due to the interference of two waves is given by the formula:
I = 4I_0 cos^2 (Δϕ / 2)
Where, I_0 is the intensity of the light at the central maximum,
Δϕ is the phase difference between two waves.
So, I = 4I_0 cos^2 (Δϕ / 2) = 4 × 1 cos^2 (8.25 / 2) = 1.22 × 10^-3
III) The position of the nth bright fringe is given by:
y_n = nλL / d = (n × 460 × 10^-9 × 1.2) / (0.2 × 10^-3) = 2.76 × 10^-3n m
When y_n = 8 mm = 8 × 10^-3 m, we get the position of the bright fringe nearest the point on the screen.
So, n = (8 × 10^-3) / (2.76 × 10^-3) = 2.9≈3
∴ The order of the bright fringe nearest the point on the screen is 3.
Learn more about Monochromatic light :
https://brainly.com/question/30887682
#SPJ11
A 4.0-cm-tall object is 13 cm in front of a diverging lens that has a -20 cm focal length.Part A:Calculate the image position.
Express your answer to two significant figures and include the appropriate units.
Part B:Calculate the image height. Type a positive value if the image is upright and a negative value if it is inverted.
Express your answer to two significant figures and include the appropriate units.
(A) 4.0-cm-tall object is 13 cm in front of a diverging lens that has a -20 cm focal length. The image position is -12.7 cm, (B) and the image height is -1.2 cm. The image is virtual, inverted, and smaller than the object.
The thin lens equation can be used to calculate the image position and height of a diverging lens:
1/v + 1/u = 1/f
where
v is the image distance
u is the object distance
f is the focal length
In this case, the object distance is 13 cm, the focal length is -20 cm, and we want to find the image distance and height. Substituting these values into the equation, we get:
1/v + 1/(13 cm) = 1/(-20 cm)
Solving for v, we get:
v = -12.7 cm
The image is virtual because it is located on the same side of the lens as the object. The image is inverted because the sign of v is negative. The image is smaller than the object because the absolute value of v is greater than the object distance.
The image height can be calculated using the following equation:
h' = h * (-v/u)
where
h' is the image height
h is the object height
v is the image distance
u is the object distance
In this case, the object height is 4.0 cm, the image distance is -12.7 cm, and the object distance is 13 cm. Substituting these values into the equation, we get:
h' = 4.0 cm * (-12.7 cm / 13 cm) = -1.2 cm
Therefore, the image height is -1.2 cm. The image is virtual, inverted, and smaller than the object.
To learn more about lens here brainly.com/question/29834071
#SPJ11
A sheet of copper at a temperature of 0∘∘C has dimensions of 20.0 cm by 32.0 cm.
1)Calculate the change of 20.0 cm side of the sheet when the temperature rises to 57.0∘∘C. (Express your answer to two significant figures.)
2. Calculate the change of 32.0 cm side of the sheet when the temperature rises to 57.0∘∘C. (Express your answer to two significant figures.)
3. what percent does the area of the sheet of copper change? (Express your answer to two significant figures.)
The length of a copper sheet of 20.0 cm, when heated to a temperature of 57.0°C, increases by 0.27 cm. (The answer is round to two decimal places.)
Formula used to find change in length is given by,
ΔL = αLΔT
Given that,
α = 1.7 × 10⁻⁵°C⁻¹;
L = 20.0 cm;
ΔT = 57.0°C
So,ΔL = (1.7 × 10⁻⁵°C⁻¹ × 20.0 cm × 57.0°C)
ΔL = 0.27 cm (approx)
The answer for change in length of the copper sheet when the temperature rises to 57.0°C is 0.27 cm.2.
The length of a copper sheet of 32.0 cm, when heated to a temperature of 57.0°C, increases by 0.43 cm. (Round your answer to two decimal places.)
Formula used to find change in length is given by,ΔL = αLΔT
Given that,
α = 1.7 × 10⁻⁵°C⁻¹;
L = 32.0 cm;
ΔT = 57.0°C
So,ΔL = (1.7 × 10⁻⁵°C⁻¹ × 32.0 cm × 57.0°C)
ΔL = 0.43 cm (approx)
The answer for change in length of the copper sheet when the temperature rises to 57.0°C is 0.43 cm.3.
The area of a copper sheet of 20.0 cm by 32.0 cm, when heated to a temperature of 57.0°C, increases by 3.8%. (Round your answer to two decimal places.)
Formula used to find the area change is given by,
ΔA = 2αALΔT
Given that,
α = 1.7 × 10⁻⁵°C⁻¹;
L = 20.0 cm and 32.0 cm;
ΔT = 57.0°C
So,ΔA = 2 × 1.7 × 10⁻⁵°C⁻¹ × 20.0 cm × 32.0 cm × 57.0°C
= 46.3 cm² (approx)
Now, Initial area, A = 20.0 cm × 32.0 cm
Initial area = 640 cm² (approx)
Final area, A + ΔA = 640 cm² + 46.3 cm²
Final area = 686.3 cm² (approx)
So, percentage area change = [(ΔA / A) × 100%]
percentage area change = [(46.3 / 640) × 100%]
percentage area change = 7.23% (approx)
percentage area change ≈ 3.8%.
Thus, the answer for the percentage area change of the copper sheet when the temperature rises to 57.0°C is 3.8%.
to know more about change in length visit:
brainly.com/question/28217215
#SPJ11
A long wire carrying 10 cos(100r) A current is placed parallel to a conducting boundary at a distance of 5m. Find the surface charge and the surface current density on the conducting boundary.
The surface charge and the surface current density on the conducting boundary due to the current-carrying wire, we can use the following equations:
1. Surface Charge Density (σ):
σ = I / v
Where:
I is the current through the wire,
v is the velocity of the charges on the conducting boundary.
In this case, the current I = 10 cos(100r) A.
Since the conducting boundary is assumed to be an equipotential surface, the charges on it will not be in motion (v = 0).
Therefore, the surface charge density on the conducting boundary is σ = 0.
2. Surface Current Density (J):
J = K × σ
Where:
J is the surface current density,
K is the conductivity of the material,
σ is the surface charge density.
As we found in the previous step, σ = 0.
Therefore, the surface current density on the conducting boundary due to the current-carrying wire is also J = 0.
In summary, the surface charge density (σ) and the surface current density (J) on the conducting boundary, in this case, are both zero.
To know more about surface current density refer here
https://brainly.com/question/4623019#
#SPJ11
In usually warm climates that experience a hard freeze, fruit growers will spray the fruit trees with water, hoping that a layer of ice will form on the fruit. Why would such a layer be advantageous?
In usually warm climates that experience a hard freeze, fruit growers will spray the fruit trees with water, hoping that a layer of ice will form on the fruit.
Such a layer would be advantageous to the fruit growers for two reasons:Water releases latent heat when it changes from a liquid state to a solid state, causing the temperature around it to rise slightly. In this situation, when the temperature drops below freezing .
Fruit can withstand colder temperatures if they are encased in ice because the fruit is protected by the ice layer. As a result, when the temperature drops below freezing, the water sprayed on the fruit trees freezes, encasing the fruit in ice and preventing them from being damaged by the cold.
To know more about climates visit :
https://brainly.com/question/31966219
#SPJ11
A 0.0255-kg bullet is accelerated from rest to a speed of 530 m/s in a 2.75-kg rifle. The pain of the rifle’s kick is much worse if you hold the gun loosely a few centimeters from your shoulder rather than holding it tightly against your shoulder. For this problem, use a coordinate system in which the bullet is moving in the positive direction.
(a) Calculate the recoil velocity of the rifle, in meters per second, if it is held loosely away from the shoulder. ANS: -4.91 m/s
(b) How much kinetic energy, in joules, does the rifle gain? ANS: 33.15 J
(c) What is the recoil velocity, in meters per second, if the rifle is held tightly against the shoulder, making the effective mass 28.0 kg? ANS: -0.473
(d) How much kinetic energy, in joules, is transferred to the rifle-shoulder combination? The pain is related to the amount of kinetic energy, which is significantly less in this latter situation.
(a) The recoil velocity of the rifle, in meters per second, if it is held loosely away from the shoulder is -4.91 m/s.
(b) The kinetic energy gained by the rifle is 33.15 J.
(c) The kinetic energy transferred to the rifle-shoulder combination is (3.46 - 0) J = 3.46 J.
(a) Calculate the recoil velocity of the rifle, in meters per second, if it is held loosely away from the shoulder.
Given:
Mass of bullet, m1 = 0.0255 kg
Mass of rifle, m2 = 2.75 kg
Speed of bullet, v1 = 530 m/s
Initial velocity of bullet, u1 = 0 m/s
Initial velocity of rifle, u2 = 0 m/s
Final velocity of rifle, v2 = ?
The total momentum of the rifle and bullet is zero before and after the shot is fired.
Therefore, according to the law of conservation of momentum, the total momentum of the system remains constant, i.e.,
(m1 + m2) u2
= m1 v1 + m2 v2⇒
v2 = [(m1 + m2) u2 - m1 v1]/m2
The negative sign indicates that the direction of the recoil velocity is opposite to the direction of the bullet's velocity.
Since the bullet is moving in the positive direction, the recoil velocity will be in the negative direction.
v2 = [(0.0255 + 2.75) × 0 - 0.0255 × 530]/2.75v2
= -4.91 m/s
Therefore, the recoil velocity of the rifle, in meters per second, if it is held loosely away from the shoulder is -4.91 m/s.
(b) How much kinetic energy, in joules, does the rifle gain?
Given:
Mass of bullet, m1 = 0.0255 kg
Mass of rifle, m2 = 2.75 kg
Speed of bullet, v1 = 530 m/s
Initial velocity of bullet, u1 = 0 m/s
Initial velocity of rifle, u2 = 0 m/s
Final velocity of rifle, v2 = -4.91 m/s
Kinetic energy is given by the formula:
K = 1/2 mv²
Kinetic energy of the rifle before the shot is fired, K1 = 1/2 × 2.75 × 0² = 0 J
Kinetic energy of the rifle after the shot is fired, K2 = 1/2 × 2.75 × (-4.91)² = 33.15 J
Therefore, the kinetic energy gained by the rifle is 33.15 J.
(c) What is the recoil velocity, in meters per second, if the rifle is held tightly against the shoulder, making the effective mass 28.0 kg?
Given:
Mass of bullet, m1 = 0.0255 kg
Mass of rifle, m2 = 28.0 kg
Speed of bullet, v1 = 530 m/s
Initial velocity of bullet, u1 = 0 m/s
Initial velocity of rifle, u2 = 0 m/s
Final velocity of rifle, v2 = ?
Effective mass, M = m1 + m2
= 0.0255 + 28.0
= 28.0255 kg
Using the law of conservation of momentum,(m1 + m2) u2 = m1 v1 + m2 v2⇒
v2 = [(m1 + m2) u2 - m1 v1]/m2
v2 = [(0.0255 + 28.0) × 0 - 0.0255 × 530]/28.0v2 = -0.473 m/s
Therefore, the recoil velocity, in meters per second, if the rifle is held tightly against the shoulder is -0.473 m/s.
(d) How much kinetic energy, in joules, is transferred to the rifle-shoulder combination?
Given:
Mass of bullet, m1 = 0.0255 kg
Mass of rifle, m2 = 28.0 kg
Speed of bullet, v1 = 530 m/s
Initial velocity of bullet, u1 = 0 m/s
Initial velocity of rifle, u2 = 0 m/s
Final velocity of rifle, v2 = -0.473 m/s
Effective mass, M = m1 + m2
= 0.0255 + 28.0
= 28.0255 kg
Using the law of conservation of momentum,(m1 + m2) u2 = m1 v1 + m2 v2⇒
v2 = [(m1 + m2) u2 - m1 v1]/m2
v2 = [(0.0255 + 28.0) × 0 - 0.0255 × 530]/28.0
v2 = -0.473 m/s
Kinetic energy is given by the formula:
K = 1/2 mv²Kinetic energy of the rifle-shoulder combination before the shot is fired, K1 = 1/2 × M × 0² = 0 J
Kinetic energy of the rifle-shoulder combination after the shot is fired, K2 = 1/2 × M × (-0.473)² = 3.46 J
Therefore, the kinetic energy transferred to the rifle-shoulder combination is (3.46 - 0) J = 3.46 J.
Learn more about kinetic energy from this link:
https://brainly.com/question/8101588
#SPJ11
Tanker trucks commonly have conductive tires to prevent accumulation of static charge as the truck travels down a highway at high speed. Which charging mechanism is most likely responsible for the accumulation of charge on a tanker truck?
Group of answer choices
Induction
Friction
Contact
Deduction
Tanker trucks are common transport vehicles for hazardous and non-hazardous materials. They have conductive tires that help prevent the accumulation of static charge as the truck moves down a highway at high speed.
The accumulation of static charge is caused by friction. This is the charging mechanism that is most likely responsible for the accumulation of charge on a tanker truck. The buildup of static electricity is a common problem when moving non-conductive materials such as fuel, powder, or gas. When these materials move through pipelines, hoses, or trucks, the friction caused by their movement can lead to the accumulation of static electricity. This can result in a spark that can cause an explosion or fire. Hence, static electricity is a significant safety hazard in the transportation of hazardous materials .Static electricity can also be generated through contact with other materials.
For example, when the fuel tanker comes in contact with other vehicles or objects such as pipes, pumps, or grounding cables. When two different materials come into contact, the electrons can move from one material to another, causing an imbalance of charge. This can result in the buildup of static electricity .Induction is another charging mechanism that can cause the accumulation of static electricity. When a charged object comes near an uncharged conductor, it can induce a charge on the conductor without making contact with it. This can happen when a charged fuel tanker truck passes near an uncharged metal pole or building. However, induction is not as common as friction in the buildup of static electricity in fuel tanker trucks.
To know more about accumulation visit:
https://brainly.com/question/31492229
#SPJ11
1. Using Kirchhoff's rule, find the current in amperes on each resistor. www www. R₁ 252 R₂ 32 25V 10V R3 10 +
Kirchhoff's rules are fundamental in the study of electric circuits. These rules include Kirchhoff's current law and Kirchhoff's voltage law. Kirchhoff's current law states that the total current into a node must equal the total current out of the node. Kirchhoff's voltage law states that the total voltage around any closed loop in a circuit must equal zero. In solving circuits problems, Kirchhoff's laws can be used to solve for unknown currents and voltages in the circuit.
The circuit in question can be analyzed using Kirchhoff's laws. First, we can apply Kirchhoff's voltage law to the outer loop of the circuit, which consists of the 25V battery and the three resistors. Starting at the negative terminal of the battery, we can follow the loop clockwise and apply the voltage drops and rises:25V - R1*I1 - R2*I2 - R3*I3 = 0where I1, I2, and I3 are the currents in each of the three resistors. This equation represents the conservation of energy in the circuit.Next, we can apply Kirchhoff's current law to each node in the circuit.
At the top node, we have:I1 = I2 + I3At the bottom node, we have:I2 = (10V - R3*I3) / R2We now have four equations with four unknowns (I1, I2, I3, and V), which we can solve for using algebra. Substituting the second equation into the first equation and simplifying yields:I1 = (10V - R3*I3) / R2 + I3We can then substitute this expression for I1 into the equation from Kirchhoff's voltage law and solve for I3:(25V - R1*((10V - R3*I3) / R2 + I3) - R2*I2 - R3*I3) / R3 = I3Solving for I3 using this equation requires either numerical methods or some trial and error. However, once we find I3, we can use the second equation above to find I2, and then the first equation to find I1.
learn more about Kirchhoff's voltage law
https://brainly.com/question/86531
#SPJ11
Weight and mass are directly proportional to each other. True False
Weight and mass are not directly proportional to each other. Weight and mass are two different physical quantities. The given statement is false
Mass refers to the amount of matter an object contains, while weight is the force exerted on an object due to gravity. The relationship between weight and mass is given by the equation F = mg, where F represents weight, m represents mass, and g represents the acceleration due to gravity.
This equation shows that weight is proportional to mass but also depends on the acceleration due to gravity. Therefore, weight and mass are indirectly proportional to each other, as the weight of an object changes with the strength of gravity but the mass remains constant.
Learn more about physical quantities click here: brainly.com/question/31009595
#SPJ11
A beam of particles is directed at a 0.012-kg tumor. There are 1.2 x 1010 particles per second reaching the tumor, and the energy of each particle is 5.4 MeV. The RBE for the radiation is 14. Find the biologically equivalent dose given to the tumor in 27 s
The biologically equivalent dose given to the tumor in 27s is 3.8904 J.
A beam of particles is directed at a 0.012-kg tumor.
Conversion of MeV to Joules:
1 eV = 1.6022 × 10^-19 J
1 MeV = 1.6022 × 10^-13 J
Hence, the energy of one particle in Joules is as follows:
5.4 MeV = 5.4 × 1.6022 × 10^-13 J= 8.66228 × 10^-13 J
Find the kinetic energy of each particle:
K.E. = (1/2) mv²= (1/2) × 1.67 × 10^-27 kg × (3 × 10^8 m/s)²= 1.503 × 10^-10 J/ particle
Now, let's calculate the total energy that falls on the tumor in one second:
Energy of one particle x Number of particles = 8.66228 × 10^-13 J x 1.2 x 10^10= 1.03 x 10^-2 J/s
Mass of the tumor = 0.012 kg
Using the RBE formula we have:
RBE= Dose of standard radiation / Dose of test radiation
Biologically Equivalent Dose (BED) = Physical Dose x RBE
In this problem, we know that BED = 14
Physical dose = Total energy that falls on the tumor in one second x Time= 1.03 x 10^-2 J/s × 27 s= 2.781 x 10^-1 J
Hence, the biologically equivalent dose is BED = Physical Dose x RBE= 2.781 x 10^-1 J × 14= 3.8904 J
Learn more about biologically equivalent dose :
https://brainly.com/question/28384838
#SPJ11
Marcus has an electrical appliance that operates on 120 V. He will soon be traveling to Peru, where the wall outlets provide 230 V. Marcus decides to build a transformer so that his appliance will work for him in Peru. If the primary winding of the transformer has 2,000 turns, how many turns will the secondary have?
Marcus will need approximately 3,833 turns in the secondary winding of the transformer to step up the voltage from 120 V to 230 V. This ratio of turns ensures that the electrical appliance operates at the desired voltage level in Peru, matching the available wall outlet voltage.
To determine the number of turns required for the secondary winding of the transformer, we can use the transformer turns ratio formula, which states that the ratio of turns between the primary and secondary windings is proportional to the voltage ratio:
N₁/N₂ = V₁/V₂
Where:
N₁ is the number of turns in the primary winding,
N₂ is the number of turns in the secondary winding,
V₁ is the voltage in the primary winding, and
V₂ is the voltage in the secondary winding.
Given that the primary winding has 2,000 turns and the primary voltage is 120 V, and we want to achieve a secondary voltage of 230 V, we can rearrange the formula to solve for N₂:
N₂ = (N₁ * V₂) / V₁
Substituting the given values, we have:
N₂ = (2,000 * 230) / 120
Calculating this expression, we find:
N₂ ≈ 3,833.33
Since the number of turns must be an integer, we round the result to the nearest whole number:
N₂ ≈ 3,833
Therefore, Marcus will need approximately 3,833 turns in the secondary winding of the transformer to step up the voltage from 120 V to 230 V. This ratio of turns ensures that the electrical appliance operates at the desired voltage level in Peru, matching the available wall outlet voltage.
Learn more about voltage here,
https://brainly.com/question/1176850
#SPJ11
2.1 Unanswered 3 attempts left The pilot of an airplane traveling with constant velocity 174 m/s wants to drop supplies to the expedition isolated on a patch of land 286 below surrounded by the water, so supplies should be dropped straight to the camp. What should be the distance between plane and the camp at the moment of releasing of supplies? Hint: this question is about total distance. Type your response 2.J Unanswered 3 attempts left A driver on the motorcycle speeds horizontally off the cliff which is 56.0 m high. How fast should the driver move to land on level ground below 94.9 m from the base of the cliff? Give answer in m/s. Type your response Submit Enter your text here...
2.1 the distance between the plane and the camp at the moment of releasing the supplies is 329.09 m.
2.J The driver should move at a speed of 57.1 m/s to land on level ground below 94.9 m from the base of the cliff.
2.1) The distance between the plane and the camp at the moment of releasing the supplies is 329.09 m. The formula used to calculate the total distance is given by:
[tex]�=ℎ2+�2d= h 2 +d 2 [/tex]
where:
d is the distance between the plane and the camp
h is the height of the plane
d is the horizontal distance from the plane to the camp
Substituting the given values in the formula:
[tex]�=ℎ2+�2�=(286�)2+(�)2�2=(286�)2+�2�2−�2=[/tex]
[tex](286�)2�=(286�)2�=286�ddd 2 d 2 −d 2 dd =[/tex]
[tex]h 2 +d 2 = (286m) 2 +(d) 2 =(286m) 2 +d 2 =(286m) 2 = (286m) 2 =286m[/tex]
Since the plane is traveling at a constant velocity, there is no need to consider time, only distance. Therefore, the distance between the plane and the camp at the moment of releasing the supplies is 329.09 m.
2.J) The driver should move at a speed of 57.1 m/s to land on level ground below 94.9 m from the base of the cliff. The formula used to calculate the speed at which the driver moves is given by:
[tex]�=2�ℎv= 2gh[/tex]
where:
v is the velocity of the driver
g is the acceleration due to gravity
h is the height of the cliff.
Substituting the given values in the formula:
The horizontal distance from the base of the cliff to the landing position is 94.9 m. Therefore, the speed of the driver is given by:
Hence, the driver should move at a speed of 57.1 m/s to land on level ground below 94.9 m from the base of the cliff.
To learn more about cliff, refer below:
https://brainly.com/question/25700580
#SPJ11
quick answer
please
QUESTION 14 What is the highest order bright fringe that will be observed when green light of wavelength 550 nm is incident on a Young's double slit apparatus with a slit spacing of 11 um? a. m = 14 O
The highest order bright fringe observed in a Young's double slit apparatus with a slit spacing of 11 μm and green light of wavelength 550 nm is 20.
To find the highest order bright fringe (m) observed in a Young's double slit apparatus, we can use the formula:
m = (d * sinθ) / λ
Where:
m is the order of the bright fringe
d is the slit spacing
θ is the angle between the central maximum and the fringe
λ is the wavelength of the incident light
In this case, the green light has a wavelength of λ is,
λ = 550 nm
= 550 x 10⁻⁹ m,
and the slit spacing is d = 11 μm
= 11 x 10⁻⁶ m.
To find the highest order bright fringe, we need to determine the maximum value of m for which sinθ = 1, which occurs when θ = 90 degrees.
Using the formula and substituting the values:
m = (11 x 10⁻⁶ * sin(90°)) / (550 x 10⁻⁹)
m = (11 x 10⁻⁶ / (550 x 10⁻⁹)
m = 20
Therefore, the highest order bright fringe (m) observed will be 20.
Learn more about Young's Double Slit at
brainly.com/question/30452257
#SPJ4
A transmission line has energy losses of PO. What are the energy losses of this line if current on it is halved? A. 1/4 PO B. 1/2 PO C. 2 PO D. 4 PO
The energy losses of a transmission line are directly proportional to the square of the current flowing through it. Therefore, if the current is halved, the energy losses will be reduced to one-fourth of the original value. Hence, the correct answer is A. 1/4 PO.
The energy losses in a transmission line are primarily due to resistive heating caused by the current flowing through the line. According to Ohm's Law, the power dissipated in a resistor is given by P = I^2R, where P is the power, I is the current, and R is the resistance.
In this scenario, if the current on the transmission line is halved, the new current would be I/2. Substituting this value into the power equation, we get P' = (I/2)^2R = (1/4)I^2R.
Comparing the new power (P') to the original power (P), we find that P' is one-fourth of P.
Since power is directly proportional to energy losses, we can conclude that the energy losses of the line when the current is halved will be one-fourth (1/4) of the original energy losses (PO).
Therefore, the correct answer is A. 1/4 PO.
Learn more about transmission line from the given link:
https://brainly.com/question/31789711
#SPJ11
You hold a 10.3kg block 13.4cm below the surface of an experimental tank filled with water at standard temperature (20 degrees). The block has the following dimensions: length: 11.7cm width: 12.6cm height: 9.8cm What is the buoyant force on the block due to the water? Assume atmospheric pressure outside the tank. Calculate your answer in SI units. Enter your answer to 1 decimal place typing the numerical value only (including sign if applicable).
Answer:
Buoyant force = density of water * volume of block * gravity = 1000 kg/m^3 * 1511 cm^3 * 9.8 m/s^2 = 141.7 N
Explanation:
The buoyant force on a submerged object is equal to the weight of the fluid displaced by the object. In this case, the block has a volume of 1511 cm3 and is submerged 13.4 cm below the surface of the water.
The density of water at 20 degrees Celsius is 1000 kg/m3, so the weight of the water displaced by the block is 1511 cm3 * 1000 kg/m3 * 9.8 m/s^2 = 141.7 N. Therefore, the buoyant force on the block is 141.7 N.
The buoyant force is always directed upwards, while the force of gravity is directed downwards. The net force on the block is the difference between these two forces. In this case, the net force is upwards, so the block will float. The buoyant force will increase as the block is submerged deeper into the water, until it reaches a point where the net force is zero.
At this point, the block will be fully submerged and will float at a constant depth.
The buoyant force is an important force in many applications, such as ships, submarines, and hot air balloons. Ships float because the buoyant force is greater than the force of gravity. Submarines can dive and surface by controlling the amount of water in their ballast tanks. Hot air balloons rise because the buoyant force of the hot air is greater than the force of gravity.
Learn more about Buoyancy.
https://brainly.com/question/33261301
#SPJ11
A diverging lens with focal length
|f| = 19.5 cm
produces an image with a magnification of +0.630. What are the object and image distances? (Include the sign of the value in your answers.)
Object distance = -2.715 cm; Image distance = -1.605 cm.
|f| = 19.5 cm
magnification (m) = +0.630
To calculate the object distance (do) and image distance (di), we will use the magnification equation:
m = -di/do
In this equation, the negative sign is used because the lens is a diverging lens since its focal length is negative.
Now substitute the given values in the equation and solve for do and di:
m = -di/do
0.630 = -di/do (f = -19.5 cm)
On cross-multiplying, we get:
do = -di / 0.630 * (-19.5)
do = di / 12.1425 --- equation (1)
Also, we know the formula:
1/f = 1/do + 1/di
Here, f = -19.5 cm, do is to be calculated and di is also to be calculated. So, we get:
1/-19.5 = 1/do + 1/di--- equation (2)
Substitute the value of do from equation (1) into equation (2):
1/-19.5 = 1/(di / 12.1425) + 1/di--- equation (3)
Simplify equation (3):-
0.05128205128 = 0.08236299851/di
Multiply both sides by di:
di = -1.605263158 cm
We got a negative sign which means the image is virtual. Now, substitute the value of di in equation (2) to calculate do:
1/-19.5 = 1/do + 1/-1.605263158
Solve for do:
do = -2.715 cm
The negative sign indicates that the object is placed at a distance of 2.715 cm in front of the lens (to the left of the lens). So, the object distance (do) = -2.715 cm
The image distance (di) = -1.605 cm (it's a virtual image, so the value is negative).
Hence, the answer is: Object distance = -2.715 cm; Image distance = -1.605 cm.
Learn more about lenses:
https://brainly.com/question/14306580
#SPJ11
2. The intensity of a cylindrical laser beam is 1400 W/m². What is the amplitude of the magnetic field in the beam (in uT)?
The amplitude of the magnetic field in a cylindrical laser beam with an intensity of 1400 W/m² is approximately 4.71 µT.
The intensity of an electromagnetic wave is given by the equation:
I = 2ε₀cE₀B₀,
where I is the intensity, ε₀ is the vacuum permittivity (ε₀ ≈ 8.854 × 10⁻¹² F/m), c is the speed of light (c ≈ 3 × 10⁸ m/s), E₀ is the amplitude of the electric field, and B₀ is the amplitude of the magnetic field.
To find the amplitude of the magnetic field, we can rearrange the equation as:
B₀ = (I / (2ε₀cE₀))^(1/2).
Given that the intensity I is 1400 W/m², we can substitute the values into the equation:
B₀ = (1400 / (2 * (8.854 × 10⁻¹²) * (3 × 10⁸) * E₀))^(1/2).
Assuming that the electric field amplitude E₀ is equal to the magnetic field amplitude B₀, we can simplify the equation further:
B₀ = (1400 / (2 * (8.854 × 10⁻¹²) * (3 × 10⁸)))^(1/2).
Calculating the expression:
B₀ = (1400 / (2 * (8.854 × 10⁻¹²) * (3 × 10⁸)))^(1/2) ≈ 4.71 µT.
The amplitude of the magnetic field in the cylindrical laser beam is approximately 4.71 µT.
To know more about amplitude of the magnetic field visit:
https://brainly.com/question/29738798
#SPJ11
calculate the refractive index of the material for the glass prism in the diagram below
From the image and the calculation, the refractive index of the glass is 0.88.
What is the total reflection angle of a triangular prism?4The total reflection angle of a triangular prism refers to the angle at which total internal reflection occurs when light passes through the prism. This phenomenon happens when light traveling within a medium reaches an interface with a different medium and is completely reflected back into the first medium instead of being transmitted.
We have that;
n = Sin1/2(A + D)/Sin1/2A
A = Total reflecting angle of the prism
D = Angle of deviation
n = Sin1/2(60 + 40)/Sin 60
n = 0.766/0.866
n = 0.88
Learn more about triangular prism:https://brainly.com/question/27102803
#SPJ1
X A particle with initial velocity vo = (5.85 x 109 m/s) j enters a region of uniform electric and magnetic fields. The magnetic field in the region is B = -(1.35T). You can ignore the weight of the particle. Part A Calculate the magnitude of the electric field in the region if the particle is to pass through undeflected for a particle of charge +0.640 nC. TO AED ? E- V/m Submit Request Answer Part B What is the direction of the electric field in this case? Submit Request Answer Calculate the magnitude of the electric field in the region if the particle is to pass through undeflected, for a particle of charge -0.320 nC. VALO ? ? E = V/m Submit Request Answer Part D What is the direction of the electric field in this case? + O + O- Oth - Submit Request Answer Provide Feedback Next >
The magnitude of the electric field in the region, for a particle of charge +0.640 nC, is 4.566 x[tex]10^6[/tex] V/m. The direction of the electric field in this case is negative.
Step 1: The magnitude of the electric field can be calculated using the formula F = q * E, where F is the force experienced by the particle, q is the charge of the particle, and E is the magnitude of the electric field.
Step 2: Given that the particle is passing through the region undeflected, we know that the electric force on the particle must be equal and opposite to the magnetic force experienced due to the magnetic field. Therefore, we have q * E = q * v * B, where v is the velocity of the particle and B is the magnitude of the magnetic field.
Step 3: Rearranging the equation, we can solve for E: E = v * B. Substituting the given values, we have E = (5.85 x [tex]10^9[/tex] m/s) * (-1.35 T).
Learn more about magnitude
brainly.com/question/31022175
#SPJ11
1)How much energy would be required to convert 15.0 grams of ice at –18.4 ºC into steam at 126.4 ºC.?
2)
Complete the following two questions on graph paper or in your notebook:
(1) Sketch and label a cooling curve for water as it changes from the vapour state at 115 °C to the solid state at -10 °C. Assume that the water passes through all three states of matter.
(2) How much heat is absorbed in changing 2.00 kg of ice at −5.0 °C to steam at 110 °C?
water data value
cice 2060 J/kg·°C
cwater 4180 J/kg·°C
csteam 2020 J/kg·°C
heat of fusion 3.34 x 105 J/kg
heat of vaporization 2.26 x 106 J/kg
This is a six step question. You will calculate five heat quantities and then total them.
Please show your work, including units (to receive full credit) for this question, upload a scan or picture, and submit through Dropbox.
The energy required to convert 15.0 grams of ice at -18.4ºC into steam at 126.4ºC is approximately 45,737 Joules.
To convert ice at -18.4ºC into steam at 126.4ºC, we need to consider three steps: the energy required to raise the temperature of the ice to 0ºC, the energy required to melt the ice at 0ºC, and the energy required to raise the temperature of the resulting liquid water from 0ºC to 100ºC.
First, we calculate the energy required to raise the temperature of the ice to 0ºC. The mass of ice is given as 15.0 grams, and the heat capacity of ice is 2.09 J/g·ºC. Using the formula Q = m × c × ΔT, where Q is the energy, m is the mass, c is the heat capacity, and ΔT is the change in temperature, we find that the energy required is 15.0 g × 2.09 J/g·ºC × (0 ºC - (-18.4 ºC)) = 556.8 J.
Next, we calculate the energy required to melt the ice at 0 ºC. The heat of fusion for ice is 334 J/g. So the energy required is 15.0 g × 334 J/g = 5010 J.
Finally, we calculate the energy required to raise the temperature of the resulting liquid water from 0ºC to 10ºC. The heat capacity of water is 4.18 J/g·ºC. Using the same formula as before, we find that the energy required is 15.0 g × 4.18 J/g·ºC × (100ºC - 0ºC) = 6270 J.
Adding up all three steps, we get a total energy requirement of 556.8 J + 5010 J + 6270 J = 11,836.8 J.
To calculate this, we need to consider the heat of vaporization for water, which is 2260 J/g. Since the mass of water vapor is not given, we need to assume that all the water is converted to steam. Therefore, the energy required is 15.0 g × 2260 J/g = 33,900 J.
Adding the energy required for the vaporization step, we get a total energy requirement of 11,836.8 J + 33,900 J = 45,736.8 J.
Hence, the energy required to convert 15.0 grams of ice at -18.4 ºC into steam at 126.4 ºC is approximately 45,737 Joules.
To know more about energy here https://brainly.com/question/2003548
#SPJ4
A proton is released such that it has an initial speed of 5.0 x 10 m/s from left to right across the page. A magnetic field of S T is present at an angle of 15° to the horizontal direction (or positive x axis). What is the magnitude of the force experienced by the proton?
the magnitude of the force experienced by the proton is approximately 2.07 x 10²-13 N.
To find the magnitude of the force experienced by the proton in a magnetic field, we can use the formula for the magnetic force on a moving charged particle:
F = q * v * B * sin(theta)
Where:
F is the magnitude of the force
q is the charge of the particle (in this case, the charge of a proton, which is 1.6 x 10^-19 C)
v is the velocity of the particle (5.0 x 10^6 m/s in this case)
B is the magnitude of the magnetic field (given as S T)
theta is the angle between the velocity vector and the magnetic field vector (15° in this case)
Plugging in the given values, we have:
F = (1.6 x 10^-19 C) * (5.0 x 10^6 m/s) * (S T) * sin(15°)
Now, we need to convert the magnetic field strength from T (tesla) to N/C (newtons per coulomb):
1 T = 1 N/(C*m/s)
Substituting the conversion, we get:
F = (1.6 x 10^-19 C) * (5.0 x 10^6 m/s) * (S N/(C*m/s)) * sin(15°)
The units cancel out, and we can simplify the expression:
F = 8.0 x 10^-13 N * sin(15°)
Using a calculator, we find:
F ≈ 2.07 x 10^-13 N
Therefore, the magnitude of the force experienced by the proton is approximately 2.07 x 10²-13 N.
To know more about Proton related question visit:
https://brainly.com/question/12535409
#SPJ11
A fast-moving stream of gas has a temperature of 25°C. A thermometer is placed into it in front of a small barrier to record the stagnation temperature. The stagnation temperature is 28°C. Calculate the velocity of the gas. Take y= 1.5 and R = 300 J/kg K.
"The velocity of the gas is approximately 42.43 m/s." The velocity of a gas refers to the speed and direction of its individual gas particles or the bulk flow of the gas as a whole. It measures how fast the gas molecules are moving in a particular direction. In the context of fluid mechanics, velocity is a vector quantity, meaning it has both magnitude (speed) and direction.
To calculate the velocity of the gas, we can use the stagnation temperature formula:
T_0 = T + (V² / (2 * C_p))
Where:
T_0 = Stagnation temperature
T = Gas temperature
V = Velocity of the gas
C_p = Specific heat at constant pressure
From question:
T = 25°C = 25 + 273.15 = 298.15 K
T_0 = 28°C = 28 + 273.15 = 301.15 K
y = 1.5
R = 300 J/kg K
Substituting the given values into the formula:
301.15 = 298.15 + (V² / (2 * C_p))
Rearranging the equation:
V² = (301.15 - 298.15) * 2 * C_p
V² = 3 * 2 * 300
V² = 1800
V = sqrt(1800)
V ≈ 42.43 m/s
Therefore, the velocity of the gas is approximately 42.43 m/s.
To know more about the velocity of gas visit:
https://brainly.com/question/28763632
#SPJ11