Answer:
Law of conservation of energy states that energy can neither be created nor can be destroyed but can be changed from one form to another
example:I am quite confused Sorry....❤plz follow me
Ralph conducted an experiment to study the effect of temperature change on the heart rate of
Daphnia, transparent aquatic invertebrates commonly known as water fleas. Ralph heated three
different beakers of water containing Daphnia to a different temperature: 30°C, 32°C, and 34°C.
He put a drop of water from each beaker on a slide mount. He then used a microscope to observe
Daphnia in each sample. He counted the number of heartbeats in one minute and averaged his
results. Which of the following could be a step in a replication of this experiment?
Answer:
c. Ralph's classmate observing Daphnia in water at 30oC, 32oC and 34oC
Explanation:
When we talk about replication, we actually mean, repetition of a scientific procedure carried out by another scientist and obtaining the same results as he/she previously did.
Replication is carried out under identical conditions as the first scientist did. If Ralph's classmate wants to replicate Ralph's work, then identical temperature conditions of 30oC, 32oC and 34oC must be used, hence the answer above.
5. What percentage of energy generation is
produced by fossil fuels? sc.7.P.11.2
to
(A) 19.5%
B) 33.2%
66.9%
D 86.4%
Answer:
It's actually D. 86.4%
Explanation:
When you combine coal, other gases, petroleum, nuclear, and natural gas, you get 86.4, which is the correct answer.
What do u call a snowman in the summer
Answer:
A puddle
Explanation:
BAHAHAHAHA
How many centimeters make an inch?
Answer:
2.54 Centimeters.
if I am on a bus and I'm relative to A the student sitting next to me B relative to the house the bus goes by?
Which of the following equations does not represent a redox reaction?
a. NH3+ HCl → NH4Cl
b. 2H2O2+ → 2H2O + O2
c. 2O3 → 3O2
d. 3NO2+ H2O → NO+ 2HNO3
e. LiCl → Li^+ + Cl
Answer:
a. NH3+ HCl → NH4Cl
c. 2O3 → 3O2
Explanation:
A redox reaction is a reaction in which there is loss or gain of electrons. As a result of that , there is a change in the oxidation number of the species involved in the reaction.
If we look at the species shown in the answer, there isn't any change in oxidation number as we move from left to right hence they are not redox reactions.
Redox reactions lead to change in oxidation number of species from left to right.
A block is pulled 0.90 m to the right in 2.5 s.
What is the block’s average speed to the nearest hundredth of a m/s?
The block’s average speed : 0.36 m/s
Further explanationDistance is the length traveled by an object within a certain of time .
Average speed = total distance/total amount of time ,
Can be formulated :
[tex]\tt avg.s(speed)=\dfrac{\Delta D}{\Delta t}[/tex]
ΔD= total distance
Δt= total time
A block is pulled 0.90 m to the right in 2.5 s :
ΔD= total distance = 0.9 m
Δt= total time = 2.5 s
The block’s average speed :
[tex]\tt avg.s=\dfrac{0.9}{2.5}=0.36~m/s[/tex]
What is the molality of a solution of 10 g NaOH in 500 g water?
Molar mass NaOH = 40 g
Explanation:
Moles of NaOH = 10g / (40g/mol) = 0.25mol.
0.25mol / 500g = 0.50mol / 1000g = 0.50mol/dm³.
The molarity is 0.50mol/dm³.
The waste product of nuclear energy which is a possible pollutant is:
A.smoke
B.hot air
C.radiation
D.heat pollution to lake
Answer:
CCCCCCC
Explanation:
Answer:
C. radiation
Explanation:
the possible pollutant is radiation because nuclear energy causes ; electromagnetic waves are radio waves, light, infrared rays, UV rays, X rays, Gamma rays. These are well known and are used extensively in the fields of communications, industry, medicine and research.
Radiation is a term given for waves caused by electromagnetism and high energy particles .Radioactive substances have High energy particles which are tiny bits of matter that are made to move at high speeds releasing nuclear radiation. There are about 50 naturally occurring radioactive substances and More than 2000 man-made ones. There are three kinds of radioactive radiation – alpha particles, beta particles and gamma radiation.
HELP!!!
Which climate favors mechanical weathering?
dry limate
cold climate
warm climate
desert climate
Explanation:
cold climates hope this helps :)
Answer:
Cold climates
Explanation:
Warm climates favor chemical weathering. Cold climates favor mechanical weathering. Chemical reactions occur faster at higher temperatures.
How does heat differ from temperature?
O Temperature is the measure of heat.
O Temperature and heat are the same thing.
O Temperature measures thermal energy, and heat is the flow of thermal eneroy
O Temperature measures the loss of energy, and heat measures the gain of eneray.
Answer: Temperature measures thermal energy, and heat is the flow of thermal energy
Explanation:
Heat describes the transfer of thermal energy between molecules within a system. Heat measures how energy moves or flows. It is measured in Joules.
Temperature measures the hotmess or coldness of a body or how much thermal energy it contains . Temperature describes the average kinetic energy of molecules within a material or system. It is measured in Celsius (°C), Kelvin(K), or Fahrenheit (°F).
Thus the correct option is Temperature measures thermal energy, and heat is the flow of thermal energy
Answer:
its c
Explanation:
edg 2021
How can you get the sugar out of the sweet tea?
Freeze the water and the sugar will appear as clumps inside the ice.
Just let the sweet to stand and the sugar will settle to the bottom of the glass.
Heat the water Cevaporating iD and you will be left with the sugar.
what's the alkalinity of lemon?
Answer:
Hey mate here's your answer ⤵️
Lemon juice in its natural state is acidic with a pH of about 2, but once metabolized it actually becomes alkaline with a pH well above 7
Hope it was helpfulllAfter watching the morning news, roommates Kelly and Rob argued about whether or not a man on trial should have been sentenced to prison for robbing goods and giving to those on welfare. Rob argued that the man should not have been convicted because he broke the law for a good cause while Kelly argued that the man should be convicted because it is against the law to steal so the man's behavior was wrong.
Based on Lawrence Kohlberg's theory of moral reasoning which of the following statements would Kohlberg agree with?
A.
Kelly is at a higher level of moral reasoning than Rob.
B.
Rob is at a higher level of moral reasoning than Kelly.
C.
Rob and Kelly are at the same level of moral reasoning.
D.
Rob has more knowledge than Kelly concerning criminal behavior.
Answer:
B) rob is at a higher level of moral reasoning than kelly
Explanation:
i just took the quiz on edge 2020
Based on Lawrence Kohlberg's theory of moral reasoning statement with which Kohlberg agree with is that Rob is at a higher level of moral reasoning than Kelly.
What is moral reasoning?Moral reasoning is an important and often daily process that people use when trying to do the right thing. For instance, every day people are faced with the dilemma of whether to lie in a given situation or not. People make this decision by reasoning the morality of their potential actions, and through weighing their actions against potential consequences.
A moral choice can be a personal, economic, or ethical one; as described by some ethical code, or regulated by ethical relationships with others. This branch of psychology is concerned with how these issues are perceived by ordinary people, and so is the foundation of descriptive ethics. There are many different forms of moral reasoning which often are dictated by culture.
Learn more about moral reasoning,here:
https://brainly.com/question/28137660
#SPJ6
what is the answer i need help
so it is necessary to place the coefficient 2 in the front of HCL to balance the chemical equation to prove that
we have two CL and two H atoms in the products and one Cl and one H atom in the reactants so if we dont put 2 in front of HCL the chemical equation will not be balanced
What are some examples of HIGH resistance? Question 2 options: wide wire, short wire, less resistors narrow wire, less resistors, long wire long wire, wide wire, more resistors long wire, narrow wire, more resistors
Answer:
The answer is long wire, narrow wire, more resistors
Explanation: I just took the test and it's right.
The table shows the average distance between the molecules of a substance in the solid, liquid, and gaseous states.
Distance Between Molecules
State Distance
X 10−9 cm
Y 10−11 cm
Z 10−7 cm
Which of the following is the correct order of the relative strengths of the intermolecular forces in the three states?
Y > Z > X
Z > X > Y
X > Z > Y
Y > X > Z
Answer:
Y > X > Z
Explanation:
The intermoecular forces refer to forces that exist between molecules of a substance. They are the secondary bond forces that hold particles of a substance together in a particular state of matter.
The shorter the distance between molecules, the greater the magnitude of intermolecular force between the molecules.
The molecules of Y are at the shortest distance from each other hence they have the highest magnitude of intermolecular forces. Followed by X and lastly Z with the greatest distance between the largest intermolecular distance.
How can high-altitude training help athletes get more oxygen to their cells
Answer:
the altitude in witch the athlete is running candy help them run faster useing less energy
The athletes acclimate to high altitudes, they have more red blood cells which allow their blood to inhale more oxygen.
Does working at higher altitudes increase red blood cells?In high-altitude environments, we breathe less oxygen per breath than at lower altitudes. Each breath delivers less oxygen to the muscles of our body. In higher altitudes, a person is getting used to breathing “thinner” air which can enhance athletes’ athletic performance.
Training at high altitudes, feel like they’re putting forth more effort to perform and they do closer to sea level. The increased rate of exertion is caused by hypoxia, which is a reduction in the amount of oxygen to the muscles to burn fuel and produce energy.
Athletes acquire more red blood cells which offer their blood to hold more oxygen. They get a natural boost to the muscles when additional oxygen is available when they compete at lower altitudes. Therefore, training at high-altitude training help athletes gets more oxygen to their cells.
Learn more about high-altitude training, here:
https://brainly.com/question/27583112
#SPJ6
I want to prepare 4 Liters of 0.25 M aqueous sodium chloride solution. How many grams of the salt will I need to weigh out?
Answer:
Mass = 58.5 g
Explanation:
Given data:
Volume of solution = 4 L
Molarity of solution = 0.25 M
Grams of NaCl required = ?
Solution:
Formula:
Molarity = number of moles / volume in L
By putting values,
0.25 M = number of moles / 4 L
Number of moles = 0.25 mol/L × 4 L
Number of moles = 1 mol
Mass in gram:
Mass = number of moles × molar mass
Mass = 1 mol × 58.5 g/mol
Mass = 58.5 g
An ionic bond is a bond between _____.
Answer:
An ionic bond is a bond between two ions of opposite charge (a cation (+) and an anion (-).
Explanation:
I really hope this helps! :)))
Calculate the pH after 10.0 mL of 0.125 M NaOH is added to 30.0 mL of 0.105 M HCHO2.
Ka (HCHO2) = 1.8 × 10-4
Answer:
pH = 3.57 after adding 10ml of 0.125M NaOH
Explanation:
NaOH + HCHO₂ => NaCHO₂ + H₂O
=> 10ml(0.125M NaOH) + 30ml(0.030M HCHO₂)
=> 0.01(0.125)mol NaOH + 0.036(0.030)mol HCHO₂ ***(see reference note at end of problem)
=> 0.00125mol NaOH + 0.00315mol HCHO₂
=> (0.00315mol - 0.00125mol) HCHO₂ = 0.0019mol HCHO₂ in excess
+ 0.00125mol NaCHO₂ formed.
HCHO₂ ⇄ H⁺ + CHO₂⁻
C(i): 0.0019mol/0.040L 0.00M 0.00125mol/0.40L
= 0.0475M = 0.0313M
ΔC: -x +x +x
C(eq): 0.0475 - x x 0.0313 +x
Ka = [H⁺][CHO₂⁻]/[HCHO₂] = (X)(0.0313 + x)/(0.0475) = 1.8 X 10⁻⁴
=> x² + 0.03168x + (-8.55 x 10⁻⁶) = 0
Solve with quadratic equation ...
x = 2.68 x 10⁻⁴M = [H⁺] at equilibrium
pH = - log[H⁺] = -log(2.68 x 10⁻⁴) = -(-3.57) = 3.57
___________________________________
*** remember, => moles = Molarity x Volume in Liters
Q. Which of the following scenarios describes a process with a negative system entropy change?
A) build a skyscraper
B)An igloo melting
C)A clean room becomes cluttered
D)Osmosis
SO2Cl2 rightarrow SO2 (g) + Cl2 (g)At 600 K, SO2Cl2 will decompose to form sulfure dioxide and chlorine gas via the above equation. If the reaction is found to be first order overall, which of the following will cause an increase in he half life of SO2CL2?A. Increasing the initial concentration of SO2,CI2.B. Increasing the temperature at which the reaction occurs.C. Decreasing the overall pressure in the container.D. None of these will increase the half life.
Answer: D. None of these will increase the half life.
Explanation:
Half life is the amount of time taken to decay to half of its original value. The half life is related to rate constant by the following relation for a first order reaction:
[tex]t_{\frac{1}{2}}=\frac{0.693}{k}[/tex]
As half life is independent of concentration , temperature and pressure, none of these factors would affect the half life.
Thus in the reaction, [tex]SO_2Cl_2 \rightarrow SO_2(g)+Cl_2(g)[/tex] following first order kinetics, none of the factors will increase the half life.
what is the correct?
Answer:
it is c
Explanation:
Dentify the compound in each of the following pairs that reacts with sodium iodide in acetone at the faster rate:__________. (a) 1-Chlorohexane or cyclohexyl chloride (b) 1-Bromopentane or 3-bromopentane (c) 2-Chloropentane or 2-fluoropentane (d) 2-Bromo-2-methylhexane or 2-bromo-5-methylhexane (e) 2-Bromopropane or 1-bromodecane
Answer:
a) 1-Chlorohexane
b) 1-Bromopentane
c) 2-Chloropentane
d) 2-bromo-5-methylhexane
e) 1-bromodecane
Explanation:
One important fact that we must have behind our minds as we approach the problem is the fact that sodium iodide in acetone will lead to an SN2 reaction because the nucleophile (iodide ion) is naked and not solvated. Also, the iodide ion is a good nucleophile and the solvent is a polar aprotic solvent. All these factors together make the reactions to tilt towards SN2 mechanism.
In a) 1-Chlorohexane offers less steric hinderance and more ease of SN2 reaction hence the answer.
In b) 1-Bromopentane offers less steric hinderance being a primary alkyl halide hence the answer.
c) In c) 2-Chloropentane contains chlorine which is more polarizable and a better leaving group than fluorine.
In d) 2-bromo-5-methylhexane is a secondary alkyl halide and undergoes SN2 reaction with less steric hindrance. 2-Bromo-2-methylhexane is a tertiary alkyl halide and does not undergo SN2 reaction due to steric hindrance.
e) 1-bromodecane is a primary alkyl halide and offers less steric resistance to the approaching nucleophile than 2-Bromopropane.
Select the keyword or phrase that will best complete each sentence.
a. alkenes
b. -ene-
c. syn and anti
d. alkanes
e. syn
f. nucleophiles
g. -yne-
h. -ane-
i. alkynes
f. electrophiles
g. anti
Compounds that contain a carbon-carbon double bond are known as________
Alkenes are electron rich; therefore, simple alkenes do not react with_______ or bases, but will react with _______or acids.
In the IUPAC system, an alkene is identified by the suffix -ene-
Addition reactions in which two parts Of a reagent are added to the same side of
a double bond are known as _________additions.
Addition reactions in which two parts of a reagent are added from opposite
sides of a double bond are called ________ additions
Halogenation and halohydrin formation occur with ________-additions.
Answer:
alkenes
nucleophiles
electrophiles
syn
anti
syn and anti
Explanation:
Compounds that contain a carbon-carbon double bond are known as alkenes
Alkenes are electron rich; therefore, simple alkenes do not react with nucleophiles or bases, but will react with electrophiles or acids.
In the IUPAC system, an alkene is identified by the suffix -ene-
Addition reactions in which two parts Of a reagent are added to the same side of
a double bond are known as syn additions.
Addition reactions in which two parts of a reagent are added from opposite
sides of a double bond are called anti additions
Halogenation and halohydrin formation occur with syn and anti -additions.
Further explanations:
Compounds that contain a carbon-carbon single bond are known as alkanes. Compounds that contain a carbon-carbon double bond are known as alkenes. Compounds that contain a carbon-carbon triple bond are known as alkynes.
Nucleophiles are electron rich so they react with electron deficient centers while Electrophiles are electron deficient so they react with electron rich centers.
Magnesium reacts with sodium fluoride to produce sodiunfluoride and elemental sodium.
Explanation:
Mg+NaF. NaF+Mg
are use sure about the question
Which of the following electronic transitions would emit the lowest energy photon?
B- n=2 to n=1
C-n=3 to n=2
D-n=5 to n=2
Answer:
i will think c-n=3 to NM=2
Initial Phenomena Question: Magnesium metal reacts with hydrochloric acid to produce magnesium chloride and hydrogen gas; how can you prove that?
Answer:
See explanation
Explanation:
The reaction equation is as follows;
Mg(s) + 2HCl(aq) -------> MgCl2(aq) + H2(g)
Firstly, the appearance of bubbles of gas shows that a gas is evolved in the reaction.
Secondly, If we hold up the flame of a butane fireplace lighter above the appearing hydrogen bubbles, we will hear audible pops as the hydrogen gas ignites showing that a combustible gas is produced in the reaction.
Lastly, as the reaction proceeds, the magnesium ribbon disappears as MgCl2 is formed. If a set up such as the image attached is used, hydrogen gas is collected over water.
Image credit: RSC education
Phenylephrine is a nasal decongestant and is the active ingredient in Sudafed, which contains phenylephrine hydrochloride (PEHCL). The conjugate acid (PEH+) of phenylphrine has a pKa = 5.5. At a physiological pH of 7.4. what is the ratio of concentrations, [PE]/[PEH+]?
Answer:
The ratio of concentrations is 79.4
Explanation:
Using Henderson-Hasselbalch equation we can solve the [PE]/[PEH+] ratio:
pH = pKa + log [A-] / [HA]
Where pH is 7.4
pKa of the phenylphrine is 5.5
[A-] is the weak base = [PE]
And [HA] is the conjugate acid [PEH+]
Replacing:
7.4 = 5.5 + log [PE] / [PEH+]
1.9 = log [PE] / [PEH+]
79.4 = [PE] / [PEH+]
The ratio of concentrations is 79.4