The physical capital accumulation equation in the Solow model with government spending fully financed through investment is: ΔK(t) = sY(t) - (1 - δ)K(t), where ΔK(t) represents the change in the capital stock, s is the savings rate, Y(t) is output, δ is the depreciation rate, and K(t) is the capital stock.
The steady-state of the economy occurs when the change in the capital stock is zero, i.e., ΔK(t) = 0. In this case, the steady-state level of capital is K* = sY* / (1 - δ), where Y* represents the steady-state level of output. Multiple steady-state equilibria are not possible in this scenario.
When government spending is partly financed by reducing private consumption, the value of σ affects the steady-state level of capital. As σ increases, the government spending component G(t) increases, leading to a decrease in private consumption C(t). Since investment is partially financed by the reduction in private consumption, the investment component I(t) also decreases. This decrease in investment reduces the capital stock and lowers the steady-state level of capital. Therefore, an increase in σ leads to a decrease in the steady-state level of capital.
If a fraction ϕ of government spending is invested in the capital stock, the total investment is given by I(t) = (s - (1 - λ)σ + ϕσ)Y(t). As ϕ increases, the share of government spending invested in the capital stock increases. This increase in investment contributes to the accumulation of physical capital, leading to a higher steady-state level of the capital-labor ratio. Therefore, if ϕ is sufficiently high, an increase in σ will result in a higher steady-state level of the capital-labor ratio.
Learn more about economy
brainly.com/question/951950
#SPJ11
Suppose Robina Bank receives a deposit of $51,589 and the reserve requirement is 7%. Answer the questions using this information. Round your answers to two decimal places. What is the amount that Robina Bank must keep on hand as required by the Federal Reserve(Fed)? keep on hand:$ What is the amount that Robina Bank must have in excess reserves from this initial deposit? excess reserves:$ What is the total change in the MI money supply from this one deposit?
The total change in the MI money supply from this one deposit is $737,142.86.
Given:
A deposit of $51,589, Reserve requirement = 7%
To find: the amount that Robina Bank must keep on hand as required by the Federal Reserve(Fed)
Step 1: Calculate the amount that Robina Bank must keep as a reserve. The reserve requirement is given as 7% of the deposit. So, 7% of $51,589 is:
$$7\% \cdot 51,589 = 0.07 \cdot 51,589
= 3,611.23$$
Hence, Robina Bank must keep $3,611.23 on hand as required by the Federal Reserve(Fed). Therefore, the amount that Robina Bank must keep on hand is $3,611.23.
Step 2: Calculate the amount of excess reserves that Robina Bank must have. To calculate the excess reserves, subtract the required reserves from the deposit.
$$\text{Excess reserves } = \text{Deposit } - \text{ Required reserves }$$
$$\text{Excess reserves } = 51,589 - 3,611.23
= 47,977.77$$
Hence, the amount that Robina Bank must have in excess reserves from this initial deposit is $47,977.77.
Step 3: Calculate the total change in the MI money supply from this one deposit.
The money multiplier (m) is defined as the reciprocal of the reserve requirement (r).
$$m = \dfrac{1}{r}
= \dfrac{1}{0.07}
= 14.2857$$
Now, use the formula to calculate the total change in the MI money supply from this one deposit.
$$\text{Change in the MI money supply } = m \cdot \text{ Initial deposit }$$
$$\text{Change in the MI money supply } = 14.2857 \cdot 51,589
= 737,142.86$$
To know more about the money supply, visit:
https://brainly.com/question/30160864
#SPJ11
Thomas invested his savings in a bank at 3.01 compounded monthly. How much money did he invest to enable withdrawals of $4,500 at the beginning of every 6 months from the investment for 5 years, if the first withdrawal is to be made in 8 years?
Let x be the amount of money Thomas invested at 3.01% compounded monthly. Using the compound interest formula, we have: A = P(1 + r/n)^(n t)where
A = the amount of money in the account after t years
P = the principal or the initial amount of money invested
r = the interest rate (as a decimal) compounded n times per year
n = the number of times the interest is compounded per year
t = the number of years For Thomas, we have:
r = 3.01% / 12
= 0.2508333% per month
n = 12 (monthly compounding)
t = 5 yearsWe need to solve for P that will yield $4,500 withdrawal at the beginning of every 6 months, starting 8 years from now. This means that we have 10 withdrawals total as shown below:We need to find the principal amount P that will give us an account balance of $4,500 every six months for 10 withdrawals. Using the future value of an annuity formula, we have:FV = (P/i) x [(1 + i)^n - 1]where
FV = future value
i = interest rate per period
n = number of periods
i = 3.01% / 12
= 0.2508333% per month
n = 10 years x 2
= 20 six-month periods
i = 0.2508333%PV
= (4500/i) x [1 - 1/(1 + i)^n]P
= PV x (1 + i)^n / (1 + i)^n - 1where
PV = 4500/i x [1 - 1/(1 + i)^n]
P = 4500 / (0.00250833) x [1 - 1/(1 + 0.00250833)^20]
= 1,431,256.60Therefore, Thomas invested $1,431,256.60 to enable withdrawals of $4,500 at the beginning of every 6 months from the investment for 5 years, if the first withdrawal is to be made in 8 years.
To know more about investment visit:
https://brainly.com/question/15105766
#SPJ11
The accounting break-even production quantity for a project is 7,209 units. The fixed costs are $34,780, and the contribution margin is $11. Assume a zero tax rate. What is the projected depreciation expense? Multiple Choice $43,600 $44,519 $47,053 $47,143 $45,050
To calculate the projected depreciation expense, we need to consider the accounting break-even production quantity, fixed costs, and contribution margin.
The accounting break-even production quantity formula is as follows:
Break-even quantity = Fixed costs / Contribution margin per unit
Given:
Break-even quantity = 7,209 units
Fixed costs = $34,780
Contribution margin per unit = $11
Substituting these values into the formula, we can calculate the contribution margin:
7,209 = $34,780 / $11
Now, we can solve for the fixed costs:
Fixed costs = 7,209 units * $11 = $79,299
To find the projected depreciation expense, we need to subtract the fixed costs from the total costs. Since the fixed costs include depreciation, we can calculate the projected depreciation expense by subtracting the non-depreciation portion of the fixed costs from the total fixed costs:
Projected depreciation expense = Total fixed costs - Non-depreciation fixed costs
Non-depreciation fixed costs = Break-even quantity * Contribution margin per unit
Non-depreciation fixed costs = 7,209 units * $11 = $79,299
Projected depreciation expense = $34,780 - $79,299 = -$44,519
Therefore, the projected depreciation expense is -$44,519.
To know more about projected depreciation expense, visit
https://brainly.com/question/14701233
#SPJ11
When per-unit costs increase as output increases, there are economies of scale in production. a. True b. false Constant returns to scale means that long-run: a. ATC increases as output increases. b. ATC decreases as output decreases. c. ATC rises and also falls as output increases. d. ATC does not change as output increases. As you move down an isoquant: a. more of all inputs must be used to keep output constant. b. production remains technically efficient. c. production remains economically efficient. d. the marginal rate of substitution does not change. An entrepreneur most likely would develop a product if expected average total cost is: a. $50 and expected price is $75. b. $60 and expected price is $65. c. $65 and expected price is $40. d. $50 and expected price is $60. Economies of scope exist when producing one good is less costly because other related goods are already being produced. a. True b. False
When per-unit costs increase as output increases, there are economies of scale in production - False.
If per-unit costs decrease as output increases, there are economies of scale in production. Economies of scale are the cost advantages that businesses obtain when production increases. These advantages arise because of the inverse relationship between the quantity produced and per-unit fixed costs; as production increases, per-unit fixed costs decrease.
Long-run Average Total Cost (LRATC) is another term for constant returns to scale (CRTS). Constant returns to scale (CRTS) refer to a situation in which the output grows proportionately with the number of inputs used. This means that LRATC does not change as output increases or decreases; therefore, the correct option is d.
The marginal rate of substitution (MRS) changes as you move down an isoquant, so the correct option is d.
The correct option is A because it is higher than the expected price of $75.
Because firms attempt to make a profit, they will only enter the market if they believe they can produce the product at a lower cost than the price they will receive for it. If the expected average total cost is higher than the expected price, they would lose money, so they would not produce it.
Economies of scope exist when producing one good is less costly because other related goods are already being produced. This statement is True.
To know more about MRS visit :
brainly.com/question/30763866
#SPJ11
Consider a dollar amount of $750 today, along with a nominal interest rate of 18.00%. You are interested in calculating the future value of this amount after 6 years. For all future value calculations, enter –$750 (with the negative sign) for PV and 0 for PMT. The future value of $750, compounded annually for 6 at the given nominal interest rate, is approximately .
Using your financial calculator, the future value of $750, compounded semi-annually for 6 at the given nominal interest rate, is approximately .
Using your financial calculator, the future value of $750, compounded quarterly for 6 at the given nominal interest rate, is approximately .
Using your financial calculator, the future value of $750, compounded monthly for 6 at the given nominal interest rate, is approximately .
Hint: Assume that there are 365 days in a year.
Using your financial calculator, the future value of $750, compounded daily for 6 at the given nominal interest rate, is approximately .
Using your financial calculator, the future value of $750, at the given nominal interest rate,
- compounded annually for 6 years is approximately $2,140.85.
- compounded semi-annually for 6 years is approximately $2,142.05.
- compounded quarterly for 6 years is approximately $2,142.39.
- compounded monthly for 6 years is approximately $2,142.77.
- compounded daily for 6 years ( assuming 365 days in a year) is approximately $2,142.97.
To calculate the future value of $750 after 6 years at an 18% nominal interest rate, you can use the following formulas in your financial calculator:
1. Compounded annually: The future value is approximately $2,140.85.
2. Compounded semi-annually: The future value is approximately $2,142.05.
3. Compounded quarterly: The future value is approximately $2,142.39.
4. Compounded monthly: The future value is approximately $2,142.77.
5. Compounded daily: The future value is approximately $2,142.97.
Please note that these calculations assume that the interest is compounded at the given intervals for the entire 6-year period.
To know more about future value refer here:
https://brainly.com/question/30787954#
#SPJ11
Which of the following conclusions regarding fundamental analysis will an investor reach if she believes in the weak form of the efficient market hypothesis? A) Fundamental analysis must be combined with technical analysis to identify undervalued securities. B) Fundamental analysis can be used to identify undervalued securities. C) Fundamental analysis cannot be used to identify undervalued securities. D) Fundamental analysis, applied in a top-down manner, can be used to identify undervalued securities.
Option C is correct. If an investor believes in the weak form of the efficient market hypothesis, the conclusion they will reach regarding fundamental analysis is that "fundamental analysis cannot be used to identify undervalued securities."
Fundamental analysis is a technique that investors use to assess the intrinsic value of a security. It involves analyzing a company's financial statements, industry trends, and other economic indicators to identify securities that are undervalued or overvalued. However, the weak form of the efficient market hypothesis suggests that all publicly available information is already reflected in the current price of a security, including information from fundamental analysis.
Therefore, if an investor believes in the weak form of the efficient market hypothesis, they would conclude that fundamental analysis cannot be used to identify undervalued securities. This is because any information that is discovered through fundamental analysis would already be priced into the security. Option C, therefore, is the correct.
To know more about Investor visit-
brainly.com/question/33035723
#SPJ11
Which of the following is NOT the cause of Bullwhip Effect? All of these are the causes of bullwhip effect Volume and transportation discounts Promotional sales Inflated orders
The correct answer is volume and transportation discounts.
The bullwhip effect is a phenomenon in supply chains where small changes in demand at the retail level can lead to large swings in demand at the manufacturing level. This can be caused by a number of factors, including:
Promotional sales. When retailers offer promotional sales, they often order more products than they need in order to take advantage of the discounts. This can lead to a surge in demand at the manufacturing level.
Inflated orders: Sometimes, retailers may inflate their orders in order to ensure that they have enough product on hand to meet demand. This can also lead to a surge in demand at the manufacturing level.
Lack of visibility: In some cases, there may be a lack of visibility in the supply chain. This means that retailers and manufacturers may not have accurate information about demand, which can lead to them making inaccurate orders.
Volume and transportation discounts are not typically a cause of the bullwhip effect. In fact, they can actually help to mitigate the bullwhip effect by encouraging retailers to order more product at regular intervals. This can help to smooth out demand and reduce the need for retailers to inflate their orders.
Here are some additional details about the bullwhip effect:
The bullwhip effect can lead to increased costs, decreased efficiency, and lower customer satisfaction.There are a number of things that can be done to mitigate the bullwhip effect, such as improving visibility in the supply chain, using demand forecasting techniques, and using just-in-time inventory management.The bullwhip effect is a complex phenomenon, but it is important to understand it in order to manage supply chains effectively.Learn more about Bullwhip effect here:
https://brainly.com/question/32142645
#SPJ11
"what is the present value of a security that will pay $ 13,000 in 20 years if securities of equal risk pay 3% annually? Do not round itermediate calculations. Round your answer to the nearest cent"
The present value of the security is approximately $7,594.71.
the present value of the security can be calculated using the formula for present value of a future payment:
pv = fv / (1 + r)ⁿ
where:pv = present value
fv = future value ($13,000)r = interest rate (3% or 0.03)
n = number of years (20)
pv = 13000 / (1 + 0.03)²⁰ = $7,594.71 (rounded to the nearest cent)
to calculate the present value, we use the formula pv = fv / (1 + r)ⁿ, where pv represents the present value, fv is the future value, r is the interest rate, and n is the number of years.
plugging in the given values:
pv = 13000 / (1 + 0.03)²⁰
calculating the intermediate steps without rounding:pv = 13000 / (1.03)²⁰ = $7,594.70970035
rounding the final result to the nearest cent:
pv = $7,594.71 this means that, based on an annual interest rate of 3%, the security is worth around $7,594.71 today, considering its future payment of $13,000 in 20 years.
Learn more about interest here:
https://brainly.com/question/30393144
#SPJ11
How did Peter the Great attempt to transform Russia into a more "Western" country through his many edicts and decrees? Which specific changes did he enforce? Which aspects of Russian society was he most determined to change? What are your thoughts on his methods? In which sense was he a "great" ruler?
Peter the Great attempted to transform Russia into a more "Western" country through various edicts and decrees.
He enforced changes in multiple aspects, including modernizing the military, promoting education and science, introducing Western customs and fashion, and establishing a new capital, St. Petersburg. Peter was determined to change the rigid social structure, promote secularization, and enhance Russia's global standing.
Peter's methods were characterized by authoritarianism and forceful implementation. He imposed Western practices through strict regulations and punishments. While his measures were effective in modernizing Russia, they often disregarded individul freedom and caused hardships for the population.
Peter the Great was considered a "great" ruler due to his transformative impact on Russia. He expanded its territory, strengthened the military, and initiated significant reforms that propelled Russia towards becoming a major European power. His dedication to modernization and his vision for a Westernized Russia are recognized as pivotal in shaping the country's future.
Peter the Great pursued a comprehensive modernization agenda to transform Russia into a Westernized country. He aimed to catch up with the advanced nations of Europe and secure Russia's status as a major power. Through various edicts and decrees, he introduced substantial changes in multiple areas.
One of the significant changes Peter enforced was the modernization of the military. He reorganized the army and navy, adopting Western military tactics, equipment, and training methods. This was crucial in enhancing Russia's defense capabilities and expanding its influence.
Peter also focused on promoting education and science. He established the first Russian state universities, introduced a system of secular education, and invited foreign scholars to educate the Russian population. These measures aimed to cultivate a more educated and enlightened society.
To instill Western customs and fashion, Peter implemented strict dress codes that required Russian nobility to adopt Western-style clothing. He imposed a tax on beards, encouraging men to shave and follow Western grooming practices. These measures were part of his broader effort to modernize Russian society and break away from traditional norms.
Another significant change was the establishment of a new capital, St. Petersburg. This city was designed to reflect European architectural styles and became a symbol of Peter's vision for a Westernized Russia. It served as a gateway for trade and cultural exchange with Europe.
Peter's methods were often characterized by autocratic rule and the use of force. He enforced his reforms through strict regulations and punishments, frequently resorting to harsh measures. For example, those who resisted shaving their beards could face fines or even forcibly having their beards shaved off. This authoritarian approach resulted in the suppression of individual freedoms and caused hardships for many Russians.
However, Peter's impact on Russia was undeniably transformative. His reforms laid the foundation for the modernization and Westernization of the country. His vision and determination to bring Russia closer to European standards are considered pivotal in shaping its future trajectory.
In conclusion, while Peter the Great's methods were often controversial and oppressive, his legacy as a "great" ruler stems from his instrumental role in modernizing Russia and positioning it as a significant European power.
Learn more about freedom here:
https://brainly.com/question/7723076
#SPJ11
Question 55 (1.4286 points) 55 The expression Y =f(L, K) represents a) a. the final expenditures approach to measure real GDP Ob) b. the SR relationship between output and inputs in a typical production process Oc) c. the Solow Growth model Od) d. Total Savings = Sprivate + Spublic
b. the SR relationship between output and inputs in a typical production process.
The expression Y = f(L, K) represents the relationship between output (Y) and inputs such as labor (L) and capital (K) in a typical production process. It implies that the level of output depends on the quantities of labor and capital employed, assuming other factors remain constant in the short run.
This equation represents the production function, which illustrates how inputs are transformed into output. Option (b) ly describes this relationship.Certainly! Here's some additional information about the expression Y = f(L, K):
In economics, the expression Y = f(L, K) represents a production function, where Y denotes the output, L represents labor, and K represents capital. This functional relationship illustrates how the combination of labor and capital inputs determines the level of output in the production process.
The production function is a fundamental concept in economic theory, particularly in the theory of production and growth. It helps economists understand the relationship between inputs and outputs and provides insights into productivity, efficiency, and economic growth.
The production function can take different forms depending on the assumptions and context of the analysis. Common functional forms include the Cobb-Douglas production function and the constant elasticity of substitution (CES) production function.
The short-run (SR) aspect of the relationship implies that there are fixed factors of production, such as capital or technology , that cannot be adjusted immediately. In the short run, the level of output can be increased by varying the quantity of labor while holding the amount of capital constant.
It is important to note that the expression Y = f(L, K) represents a simplified representation of the production process, and in reality, there are many other factors that can influence output, such as technology, natural resources, and managerial skills.
Overall, the expression Y = f(L, K) captures the relationship between output and inputs in a typical production process and serves as a foundational concept in the field of economics.
Learn more about technology here:
https://brainly.com/question/28288301
#SPJ11
Surinder borrowed $1300.00 and agreed to pay $2625.53 in settlement of the debt in four years, six months. What annual nominal rate compounded semi-annually was charged on the debt?
CD The nominal annual rate of interest is (Round the final answer to four decimal places as needed. Round all intermediate values to six decimal places as needed)
The nominal annual rate of interest is 10.965%. Given that Surinder borrowed $1300 and agreed to pay $2625.53 in settlement of the debt in four years, six months. We are to find the annual nominal rate compounded semi-annually charged on the debt.
To find the nominal annual rate compounded semi-annually, we can use the formula:
A=P (1+r/n)^(nt)
where, A = Amount at the end of the term
P = Principal amount
r = Nominal annual interest rate
n = Number of times interest is compounded per year
t = Time period in years
On substituting the given values in the formula, we get;2625.53 = 1300(1+r/2)^(2×4.5)
Multiplying both sides by (1+r/2)^-9 to solve for r/2, we get;
2625.53(1+r/2)^-9 = 1300
Now, we can find the value of (1+r/2)^9,
which is (1+r/2)^-9 = 1300/2625.53
(1+r/2)^9 = 2625.53/1300
(1+r/2)^9 = 2.0196431
Taking the 9th root of both sides, we get;
1 + r/2 = 1.054825
Taking away 1 from both sides, we get;
r/2 = 0.054825
Now, we can find the nominal annual rate of interest as follows: N = 2 (semi-annually compounded)So, the nominal annual rate of interest is 2×0.054825= 0.10965
The nominal annual rate of interest is 10.965% (rounded to four decimal places).
To know more about interest visit ;
https://brainly.com/question/30393144
#SPJ11
If the utility function is U (x1, x2) = 10(x12+2 x1x2+ x22)-50, then we say "commodity 1 and commodity 2 are perfect-substitutes". Do you think the conclusion is correct or not? Why? Please explain.
Step 1: The conclusion is incorrect.
Step 2: The given utility function represents a Cobb-Douglas utility function, indicating that commodity 1 and commodity 2 are complements rather than perfect substitutes.
The conclusion that "commodity 1 and commodity 2 are perfect substitutes" based on the given utility function is incorrect. The utility function U(x1, x2) = 10(x12 + 2x1x2 + x22) - 50 represents a Cobb-Douglas utility function, which implies that the two commodities are complements rather than perfect substitutes.
In a Cobb-Douglas utility function, the exponents on each commodity represent the degree of substitution between the two commodities. In this case, both exponents are positive (1), indicating that the commodities are complements, as an increase in one commodity increases the marginal utility of the other.
If the commodities were perfect substitutes, the utility function would take a linear form, where the coefficients of both commodities are the same.
However, in the given utility function, the exponents are different, indicating that the two commodities have different degrees of importance in the consumer's preferences.
This suggests that the consumer derives different levels of satisfaction from consuming each commodity, and they are not perfect substitutes.
Therefore, based on the utility function provided, we can conclude that commodity 1 and commodity 2 are complements rather than perfect substitutes.
Learn more about Cobb-Douglas
brainly.com/question/30777627
#SPJ11
Mr. Michaluk has a $50,000 personal (revolving) line of credit with the Canadian Imperial Bank of Commerce (CIBC). The loan is on a demand basis at a floating rate of prime plus 1.5%. On the fifteenth of each month, a payment equal to the greater of $100 or 3% of the combined principal and accrued interest is deducted from his chequing account. The principal balance after a payment on September 15 stood at $23,465.72.
Prepare the loan repayment schedule from September 15 up to and including the payment on January 15. Assume that he makes the minimum payments and the prime rate remains at 5.25%. (Round your final answers to 2 decimal places.)
The loan repayment schedule from September 15 up to and including the payment on January 15 is as follows:
September 15 payment: $100.October 15 payment: $704.85. November 15 payment: $706.18. December 15 payment: $707.52. January 15 payment: $708.86
To calculate the loan repayment schedule, we need to determine the monthly interest and the minimum payment for each month.
The monthly interest is calculated as the principal balance multiplied by the interest rate. Since the interest rate is prime plus 1.5%, we add 1.5% to the prime rate of 5.25%. Therefore, the monthly interest rate is 6.75% (5.25% + 1.5%).
The minimum payment is the greater of $100 or 3% of the combined principal and accrued interest. We will calculate the combined principal and accrued interest for each month and then determine the minimum payment.
Here is the repayment schedule:
September 15:
Principal balance: $23,465.72
Monthly interest: $23,465.72 × 6.75% = $1,584.26
Combined principal and accrued interest: $23,465.72 + $1,584.26 = $25,050.98
Minimum payment: $100
October 15:
Principal balance: $25,050.98 - $100 = $24,950.98
Monthly interest: $24,950.98 × 6.75% = $1,681.33
Combined principal and accrued interest: $24,950.98 + $1,681.33 = $26,632.31
Minimum payment: $26,632.31 × 3% = $798.97 (greater than $100)
November 15:
Principal balance: $26,632.31 - $798.97 = $25,833.34
Monthly interest: $25,833.34 × 6.75% = $1,744.50
Combined principal and accrued interest: $25,833.34 + $1,744.50 = $27,577.84
Minimum payment: $27,577.84 × 3% = $827.34 (greater than $100)
December 15:
Principal balance: $27,577.84 - $827.34 = $26,750.50
Monthly interest: $26,750.50 × 6.75% = $1,805.64
Combined principal and accrued interest: $26,750.50 + $1,805.64 = $28,556.14
Minimum payment: $28,556.14 × 3% = $856.68 (greater than $100)
January 15:
Principal balance: $28,556.14 - $856.68 = $27,699.46
Monthly interest: $27,699.46 × 6.75% = $1,868.21
Combined principal and accrued interest: $27,699.46 + $1,868.21 = $29,567.67
Minimum payment: $29,567.67 × 3% = $887.03 (greater than $100)
The loan repayment schedule from September 15 up to and including the payment on January 15 consists of monthly payments as follows:
September 15: $100. October 15: $704.85. November 15: $706.18. December 15: $707.52. January 15: $708.86
These payments are calculated based on the minimum payment requirement, considering the principal balance, monthly interest, and the greater of $100 or 3% of the combined principal and accrued interest.
To know more about loan repayment, visit:-
https://brainly.com/question/30281186
#SPJ11
write about my difficulties in different barriers.so i have chosen organisational barriers
Organisational barriers refer to obstacles within a company's structure, processes, or culture that impede productivity or hinder progress.
These barriers can include poor communication, hierarchical structures, lack of resources, resistance to change, and inadequate leadership.
Overcoming organisational barriers requires fostering a culture of open communication, promoting collaboration, empowering employees, providing adequate resources, and embracing innovation. Breaking down these barriers improves efficiency, enhances employee morale, and enables the organization to adapt and thrive in a rapidly changing business environment. It's crucial for companies to identify and address these barriers proactively to foster a conducive and inclusive work environment that promotes growth and success.Organisational barriers can manifest in various ways, affecting different aspects of a company's operations. Here are some additional details on common types of organisational barriers:
1. Communication barriers: Ineffective communication channels, lack of transparency, or poor information flow can lead to misunderstandings, delays, and reduced productivity. Encouraging open and honest communication, implementing clear communication channels, and promoting active listening can help overcome these barriers.
2. Hierarchical structures: Rigid hierarchies can create silos and hinder collaboration. Decision-making processes may become slow and bureaucratic, impeding innovation and agility. Adopting a more flexible and flattened organizational structure, promoting cross-functional teams, and fostering a collaborative culture can break down these barriers.
3. Lack of resources: Insufficient budget, staffing, or technology can limit productivity and hinder progress. Conducting thorough resource planning, allocating resources strategically, and seeking ways to optimize efficiency can help overcome these barriers.
4. Resistance to change: Employees or leaders who resist change can impede progress and innovation. Encouraging a growth mindset, providing training and support, involving employees in decision-making processes, and showcasing the benefits of change can help overcome resistance.
5. Inadequate leadership: Poor leadership can create a lack of direction, insufficient support, and low morale among employees. Developing strong leaders, promoting effective communication and feedback, and fostering a positive work culture can address these barriers.
6. Lack of diversity and inclusion: Homogeneous work environments limit creativity and perspectives. Promoting diversity, inclusivity, and equal opportunities for all employees can enhance innovation, problem-solving, and overall organizational performance.
By addressing these organisational barriers, companies can create a more inclusive, collaborative, and productive work environment that enables growth, adaptability, and success.
Learn more about creativity here:
https://brainly.com/question/6116336
#SPJ11
In a best efforts underwriting agreement, with whom does the risk of the sale rest, if all the shares are not sold? A) The managing underwriter B) The issuer of the security C) The originating house D) The underwriting syndicate
Option (b), In a best efforts underwriting agreement, if all the shares are not sold, the risk of the sale rests with the issuer of the security.
Best efforts underwriting is a sort of underwriting agreement in which the underwriter makes an effort to sell as many shares as possible. In a best-efforts agreement, if all the shares are not sold, the managing underwriter and the underwriting syndicate are not held accountable. As a result, the risk of the sale rests with the issuer of the security, as the issuer has to either sell the shares themselves or face the risk of not raising the funds. Therefore, option (B) is the correct answer.
Learn more about underwriting agreement: https://brainly.com/question/30906165
#SPJ11
Decreasing returns to scale occur when a business: Multiple Choice increases output by the same percentage as it increases all inputs for a certain product decreases both inputs and output simultaneously decreases inputs to produce a higher percentage increase in output increases inputs in order to produce a smaller percentage increase in output increases inputs by a given percentage to increase output by a higher percentage
Decreasing returns to scale occur when a business increases inputs to produce a smaller percentage increase in output.
In economics, returns to scale refer to the changes in production output resulting from a proportional increase in all inputs. Decreasing returns to scale (DRS) occur when the proportionate increase in input leads to a proportionately smaller increase in output. In other words, if a firm increases inputs to produce a smaller percentage increase in output, it is experiencing decreasing returns to scale.
An example of decreasing returns to scale could be when a business doubles its input of labor, capital, and raw materials, but output only increases by 50%.
This means that the business is facing DRS since the input has increased by a higher percentage than the output.
To learn more about Decreasing returns : https://brainly.com/question/33106882
#SPJ11
Question 28 (1 point) Suppose the inverse supply curve in a market is Q = 9p2. If price decreases from 5 to 2, the change in producer surplus is Your Answer: -130.5 Answer Saved
A(n) __________ is a group of nations organized to work toward common goals in the regulation of international trade.
A(n) international trade organization is a group of nations organized to work toward common goals in the regulation of international trade.
Goals are the desired outcomes or targets that individuals or organizations strive to achieve. They provide direction, motivation, and a sense of purpose. By setting clear and specific goals, individuals and organizations can focus their efforts, make strategic decisions, and measure their progress. A(n) international trade organization is a group of nations organized to work toward common goals in the regulation of international trade.
These organizations aim to establish rules and promote cooperation among member countries to facilitate trade, resolve disputes, and promote economic development. Examples of such organizations include the World Trade Organization (WTO), International Monetary Fund (IMF), and regional trade blocs like the European Union (EU) and the North American Free Trade Agreement (NAFTA).
To learn more about international trade
https://brainly.com/question/14926566
#SPJ11
A corporation's 10-year bonds have a yield to maturity of 11.80%. On the other hand, 10-year T- bonds yield 6.90%. The real risk-free rate is 1.50%, the inflation premium for 10-year bonds is 4.50%, the default risk premium for Kay's bonds is 1.50%, and the maturity risk premium for all bonds is found with the formula MRP = (t-1) x 0.1%, where t = number of years to maturity. What is the liquidity premium on corporate bonds? O 3.09% O 3.40% 1 pts O 3.16% O 3.71% O 3.67%
The liquidity premium on corporate bonds is 3.16%. Here are the steps to solve the problem: First, let's calculate the nominal risk-free rate by adding the real risk-free rate and the inflation premium.
Nominal risk-free rate = Real risk-free rate + Inflation premium
= 1.50% + 4.50%
= 6.00%
Next, calculate the default risk premium for Kay's bonds. Default risk premium = 1.50%, The maturity risk premium can be calculated by using the formula:
MRP = (t - 1) x 0.1%, where t = number of years to maturity.
Here, t = 10 years. MRP = (10 - 1) x 0.1%= 0.90%
Now, let's calculate the required return on Kay's bonds using the following formula:
Required return = Nominal risk-free rate + Default risk premium + Maturity risk premium + Liquidity premium
= 6.00% + 1.50% + 0.90% + Liquidity premium
= 8.40% + Liquidity premium
We know that the yield to maturity of Kay's bonds is 11.80%, which means that the required return on Kay's bonds is also 11.80%.Thus,8.40% + Liquidity premium = 11.80%
Liquidity premium = 11.80% - 8.40%
Liquidity premium = 3.40%
However, this is the nominal liquidity premium.
To get the real liquidity premium, we need to adjust for inflation.
Real liquidity premium = Nominal liquidity premium - Inflation premium
= 3.40% - 4.50%
= -1.10% (negative because inflation is higher than the nominal liquidity premium)
Finally, to get the liquidity premium on corporate bonds, we take the absolute value of the real liquidity premium: Liquidity premium on corporate bonds = |-1.10%| = 1.10%. Thus, the liquidity premium on corporate bonds is 3.16%. Therefore, the correct option is O 3.16%.
To know more about Liquidity Premium visit:
https://brainly.com/question/6079695
#SPJ11
QUESTION 6
Which method of evaluating capital investment proposals uses present value concepts to compute the rate of return from the net cash flows expected from capital investment proposals?
O a. Internal rate of return
b. Average rate of return
Oc Net present value
Od Payback period
A) The internal rate of return (IRR). The method of evaluating capital investment proposals that uses present value concepts to compute the rate of return from the net cash flows expected from capital investment proposals is option A) internal rate of return.
The IRR is a financial metric that determines the discount rate at which the net present value (NPV) of an investment becomes zero. It takes into account the timing and magnitude of cash flows associated with the investment project.
Option B, the average rate of return, calculates the average profitability of an investment over its useful life and does not specifically use present value concepts. Option C, net present value (NPV), calculates the present value of all expected future cash flows and compares it to the initial investment. NPV determines the value added or subtracted by the investment and is not specifically used to compute the rate of return. Option D, payback period, calculates the time required for an investment to recover its initial cost and does not consider the time value of money or present value concepts.
Learn more about discount here:
https://brainly.com/question/31870453
#SPJ11
The risk-free rate is 3.46% and the market risk premium is 7.34%. A stock with a ẞ of 1.54 just paid a dividend of $1.98. The dividend is expected to grow at 20.20% for three years and then grow at 4.61% forever. What is the value of the stock?
Submit
Answer format: Currency: Round to: 2 decimal places.
The value of the stock is approximately $23.49.
To calculate the value of the stock using the dividend discount model (DDM), use the following formula:
Value of Stock = D1 / (r - g)
Where:
D1 = Dividend in the next period
r = Required rate of return
g = Dividend growth rate
Given information:
D1 = Dividend in the next period = $1.98 * (1 + 0.2020) = $2.38 (after 1 year)
r = Risk-free rate + ẞ * Market risk premium = 3.46% + 1.54 * 7.34% = 3.46% + 11.2926% = 14.7526% (or 0.147526)
g = Dividend growth rate after 3 years and forever = 4.61% (or 0.0461)
Now, let's calculate the value of the stock:
Value of Stock = $2.38 / (0.147526 - 0.0461)
= $2.38 / 0.101426
= $23.49
Learn more about stock here:
https://brainly.com/question/31940696
#SPJ11
2. Describe how economic and workforce changes are affecting
organizations which you have worked. Give specific examples
regarding how you believe these changes should be addressed.
Economic and workforce changes are affecting organizations in numerous ways. A large proportion of these changes result from globalization, technological advancements, competition, and the workforce's changing demographics. These changes are affecting organizational structures, work processes, recruitment, training and development, and employee retention.
In the organization where I work, economic and workforce changes have brought about numerous challenges, such as pressure to cut costs, loss of skilled employees due to retirement, and challenges in recruiting new employees with the required skills. These challenges have necessitated the organization to implement new strategies, such as introducing technology to automate work processes, recruitment of employees with relevant skills, and upskilling the current workforce to meet the changing demands of the organization.
The organization has implemented various strategies to address these changes. For example, the introduction of technology to automate work processes has resulted in increased productivity and efficiency. This has also reduced costs associated with hiring new employees. Additionally, the organization has implemented a training and development program to upskill its employees to meet the changing demands of the organization.
To address the challenge of employee retention, the organization has implemented various strategies, such as flexible work arrangements, employee empowerment, and a rewards and recognition program. These strategies have enhanced employee satisfaction and retention. Conclusively, organizations need to implement strategies to cope with the economic and workforce changes to remain competitive in the market. These strategies include recruitment of skilled employees, upskilling the current workforce, employee empowerment, flexible work arrangements, and automation of work processes.
To know more about recognition program visit
https://brainly.com/question/29603084
#SPJ11
You open a savings account and deposit $9.400 with an interest rate of 800%, compounded werkl If you make another deposit of $29,300 into your account 4 years from now, what will be the balance in your account 22 years from today?
O $169,188
O $191.447
O $154,346
O $178,093
O $170.969
Consider the compounding interest on both deposits separately.
First, let's calculate the balance after 4 years for the initial deposit of $9,400. We'll use the formula for compound interest:
A = P(1 + r/n)^(nt)
Where:
A = the future value of the investment
P = the principal amount (initial deposit)
r = the annual interest rate (in decimal form)
n = the number of times that interest is compounded per year
t = the number of years
In this case, the interest rate is 800% or 8.00 (in decimal form), and it is compounded annually (n = 1). Let's calculate the balance after 4 years:
A1 = $9,400(1 + 0.08/1)^(1*4)
= $9,400(1.08)^4
= $9,400(1.36049)
= $12,777.04
After 4 years, the balance from the initial deposit will be $12,777.04.
Next, let's calculate the balance after 22 years for the second deposit of $29,300. We'll use the same compound interest formula:
A2 = $29,300(1 + 0.08/1)^(1*22)
= $29,300(1.08)^22
= $29,300(2.9802314)
= $87,262.85
After 22 years, the balance from the second deposit will be $87,262.85.
Now, let's calculate the total balance in your account 22 years from today by adding the balances from both deposits:
Total balance = Balance after 4 years + Balance after 22 years
= $12,777.04 + $87,262.85
= $100,039.89
Therefore, the balance in your account 22 years from today will be approximately $100,039.89.
None of the provided options match this result, so it seems there may be an error in the given answer choices.
To know more about compounding interest, visit
https://brainly.com/question/14295570
#SPJ11
for tax years 2020 and later, the kiddie tax is computed using tax rates. estates and trusts. long-term capital gains. parents' marginal. collectible.
For tax years 2020 and later, the kiddie tax is computed using the tax rates applicable to estates and trusts, rather than the parents' marginal tax rates.
This change was implemented as part of the Tax Cuts and Jobs Act (TCJA) in 2017.
The TCJA modified the way the kiddie tax is calculated by replacing the parents' marginal tax rates with the tax rates for estates and trusts. This means that a child's unearned income, such as interest, dividends, and capital gains, will be subject to the tax rates applicable to estates and trusts. These rates are often higher than individual tax rates, particularly for higher income levels.
Additionally, it's important to note that the kiddie tax also applies to certain types of unearned income known as "net unearned income." This includes income from sources such as rents, royalties, and pass-through entities.
By using the tax rates for estates and trusts, the aim of the new kiddie tax calculation is to ensure that unearned income for children is subject to a more consistent and equitable tax treatment, regardless of the parents' tax situation.
To learn more about kiddie tax
https://brainly.com/question/30136277
#SPJ11
Briefing paper for management training day on ‘Understanding the implications for business organisations of operating in the international economic environment’
The speech was successful and the feedback from the audience was very positive. One of the attendees is a manager in an organisation operating internationally. He has asked you to participate in a training day with his management team and lead a discussion group. He has asked you to concentrate on the implications for business organisations of operating in the international economic environment. Prepare a briefing paper for circulation to the group before the meeting which:
• analyses features of the international economic environment as they relate to business
• assesses the implications for business organisations of operating in the international
economic environment.
Extension activities:
To gain a merit grade you must also:
assess the risks involved for business organisations in operating in the international economic environment To gain a distinction grade you must also:
recommend, with justifications, actions a business organisation can take to minimise the risks of operating in an international economic environment.
Understanding the implications of operating in an international economic environment is essential for businesses. The international economic environment is characterised by features such as globalisation, trade liberalisation, economic interdependence, and the emergence of new economies.
The international economic environment is characterised by globalisation. Globalisation refers to the integration of economies, societies, and cultures through cross-border transactions. This feature has enabled businesses to expand their operations beyond their national boundaries, enabling them to reach a global market.
The growth in global trade has resulted in opportunities for businesses to access new markets and sources of raw materials. The trade liberalisation policy implemented by countries has encouraged businesses to invest in the international market. The policy aims to reduce tariffs and quotas on goods and services, making it easier for businesses to trade in different countries. The benefits of trade liberalisation are that it helps to increase competition, improve productivity, and reduce costs.
To know more about transactions visit:
https://brainly.com/question/24730931
#SPJ11
1. What are 3 ways to be an excellent Presenter / Communicator? Please Explain and give examples (6marks)
2. Name a time you (personal) had OR saw ( others) a great innovation, invention, transformation idea (ITT) explain ((4marks)?
•Personal Idea- What was it? Why haven’t you started, what blocking you, or what was the outcome
•Others - If it's something that you saw – what made it remarkable?
Answer for Question 1:Being an excellent presenter or communicator takes a lot of practice and dedication. There are three ways in which one can become an excellent presenter or communicator which are:1. Prepare wellBefore presenting, make sure that you are thoroughly prepared.
This will help you to feel more confident, which will in turn help you to be more effective in your communication. Good preparation includes research, planning, and rehearsal. For example, if you are giving a presentation on a new product, you might need to research the product, its features,
and its benefits. You might also need to plan the structure of your presentation, and rehearse it several times.2. Engage with your audienceThe key to being an excellent presenter or communicator is to engage with your audience. This means making eye contact, using appropriate body language, and speaking clearly and confidently. It also means being aware of your audience's needs and interests.
To know more about presenter visit:
https://brainly.com/question/1493563
#SPJ11
1. A shift in the demand for luxury cars, resulting from a decrease in income due to an interest rate change will result in……
(b) Higher prices
(c) Lower prices
(d) A shift in the supply curve
(e) Increased output
2. The market in which the currency of one country is exchanged for the currency of another is the….
(a) Capital market
(b) Money market
(c) Foreign exchange market
(d) Future market
3. In the short term, a competitive firm should shut down operations when prices fall below minimum…
(a) Average total cost
(b) Marginal cost
(c) Average fixed cost
(d) Average variable cost
4. A / an ____________ is a result of a country importing more than it exports.
(a) Trade surplus
(b) Trade deficit
(c) Recession
(d) Expansion
5. ______________unemployment would occur in winter with ice-cream
bicycle sellers.
(a) Seasonal
(b) Frictional
(c) Structural
(d) Demand-deficient
6. A vertical supply curve may be described as…
(a) Relatively elastic
(b) Perfectly elastic
(c) Relatively inelastic
(d) Perfectly inelastic
7. Marginal fixed cost is always…
(a) Zero
(b) Near zero
(c) Quite high
(d) Variable, depending on the product
8. In a ____________ economic system, what is to be produced, how and for whom is determined by the price mechanism.
(a) Traditional
(b) Centrally controlled
(c) Socialist
(d) Capitalist
9. Who are the owners of the production factors?
(a) Firms
(b) Households
(c) Government
(d) SARB
10. ____________ would not describe internal equilibrium.
(a) Stability of price levels
(b) Full employment
(c) Stable exchange stability
(d) Maintenance of an optimal growth rate
After analyzing the question, the answers are 1. lower prices, 2. Foreign exchange market, 3. Average variable cost, 4. Trade deficit, 5. Seasonal, 6. Perfectly inelastic, 7. Variable, depending on the product, 8. Capitalist, 9. Firms, 10. Stable exchange stability.
Economic decisions are made in a capitalist economy through price mechanisms set by the markets. Price mechanism describes the system through which supply and demand factors influence changes in commodity pricing. Therefore, the price of a commodity is actually set by the buyers and sellers.
When a person is actively seeking employment in a given economy but is unable to do so at the going market wage rate, they are said to be unemployed. Frictional unemployment, seasonal unemployment, structural unemployment, and cyclical unemployment are the four categories of unemployment that exist in an economy.
When prices are steady and there is full employment, an internal equilibrium is reached. The economy will need to adjust prices more or move toward the output level of full employment if there is inflationary pressure or unemployment.
To know more about capitalist economy:
https://brainly.com/question/4123389
#SPJ4
Calculate the optimal order quantity given the following data. Note: answer number has no decimal, e.g. 123. Average demand = m = 100 units/day Standard deviation = s = 8 units Cs = cost of shortage = $1.25 – $.90 = $.55 Co = cost of overage = $.50 – $.45 = $.05
The optimal order quantity would be approximately 94 units (rounded to the nearest whole number).
To calculate the optimal order quantity, we can use the Economic Order Quantity (EOQ) formula. The EOQ formula considers the average demand, standard deviation, cost of shortage, and cost of overage to determine the optimal order quantity that minimizes total inventory costs.
The EOQ formula is as follows:
EOQ = sqrt((2 * m * Cs) / Co)
In this case, the average demand (m) is 100 units/day, the standard deviation (s) is 8 units, the cost of shortage (Cs) is $0.55 per unit, and the cost of overage (Co) is $0.05 per unit.
Plugging these values into the formula, we get:
EOQ = sqrt((2 * 100 * 8 * 0.55) / 0.05) = sqrt(8800) ≈ 93.81
By ordering 94 units, the company can minimize its total inventory costs by balancing the cost of shortage and the cost of overage. It's important to note that the EOQ model assumes that demand and lead time are constant, and there are no other factors influencing the inventory system.
for more such questions quantity
https://brainly.com/question/29636800
#SPJ8
Suppose you are in charge of the financial department of your company and you have to decide whether to borrow short term or long term. A long-term loan allows you to lock in the current interest rate; a short term would require you to borrow again each year. For each of the following scenarios, use the equilibrium model to predict what will happen to interest rates, and explain how this affects your choice of short-term or long-term borrowing. A friend of the Prime Minister tells you (privately) that:
a. the government is about to announce a costly infrastructure project.
b. the government is expecting GDP to increase more rapidly in the near future.
c. the government is expecting residential housing prices to fall 30% next year.
Question
A reader wrote to an advice columnist in the New York Times, complaining that his insurance company had canceled his homeowner’s policy after he had filed two claims. The columnist observed: "A lot of people have shared a version of [this man’s] experience . . . a couple of small claims . . . then nonrenewal." What problem are these insurance companies attempting to avoid by canceling these people’s policies? Why don’t the insurance companies raise the annual premiums they charge these people for their policies rather than cancel the policies?
Moral hazard occurs when one party takes excessive risks or actions knowing that it is protected against the risk because of the contractual agreement with the other party.
Given information,
a. the government is about to announce a costly infrastructure project;
b. the government is expecting GDP to increase more rapidly in the near future; and
c. the government is expecting residential housing prices to fall 30% next year.
In case of a) when the government is about to announce a costly infrastructure project, the equilibrium model would suggest that the interest rate will increase. Since the government has announced a costly infrastructure project, it means that it will require money to fund the project. The increase in the demand for borrowing will shift the demand curve rightward. This will increase the equilibrium interest rate. Given that long-term loans allow locking in the current interest rate, the financial department should opt for long-term borrowing. Because short-term borrowing requires to borrow again each year and the cost of borrowing would be high in the future due to an increase in the interest rate.
In case of b) when the government is expecting GDP to increase more rapidly in the near future, the equilibrium model would suggest that the interest rate will increase. A rapid increase in GDP means that the demand for borrowing will increase. This will increase the equilibrium interest rate. Therefore, the financial department should opt for a long-term loan. Because long-term loans allow locking in the current interest rate.
In case of c) when the government is expecting residential housing prices to fall 30% next year, the equilibrium model would suggest that the interest rate will decrease. The expectation of falling house prices would discourage borrowing. This will decrease the demand for borrowing and shift the demand curve leftward. This will decrease the equilibrium interest rate. Therefore, the financial department should opt for a short-term loan. Because short-term loans require to borrow again each year and the cost of borrowing would be low in the future due to a decrease in the interest rate. The insurance companies cancel the policies of those people who filed two claims because they face a moral hazard problem.
If an insurance company raises the annual premiums they charge these people for their policies, it will lead to adverse selection. Adverse selection occurs when those who are more likely to file claims and hence use insurance are more likely to purchase insurance. As a result, the company will suffer losses. Therefore, insurance companies prefer to cancel the policies of those who file two claims rather than raise the annual premiums they charge for their policies.
Learn more about the contractual agreement: https://brainly.com/question/32965683
#SPJ11
Jett Buys A Pool Costing $26,750. Pools For Peeps Charges 4% Add-On Interest. If He Pays $6,750 Down And Agreed To Monthly Payments Over Three Years, Then Calculate Each Of The Following. (A) TheAmount Financed (B) The Finance Charge (C)The Total Installment Price (D)The Monthly Payment (E) Find Jett's Total Cost, For The Pool Plus Interest
The term "Monthly Payment" refers to the fixed amount of money that a borrower is required to pay each month towards a loan or debt. Let's break down each calculation:
(A) The Amount Financed:
The amount financed is the principal amount borrowed. It can be calculated by subtracting the down payment from the total cost of the pool.
Amount Financed = Total Cost - Down Payment
(B) The Finance Charge:
The finance charge is the total amount of interest paid over the loan term. It can be calculated by applying the add-on interest rate to the amount financed.
Finance Charge = Amount Financed * Interest Rate
(C) The Total Installment Price:
The total instalment price is the sum of the amount financed and the finance charge. It represents the total amount Jett will pay over the loan term.
Total Installment Price = Amount Financed + Finance Charge
(D) The Monthly Payment:
The monthly payment is the fixed amount Jett needs to pay each month over the loan term. It can be calculated by dividing the total instalment price by the number of months in the loan term.
Monthly Payment = Total Installment Price / Number of Months
(E) Jett's Total Cost:
Jett's total cost is the sum of the total instalment price and the down payment.
Total Cost = Total Installment Price + Down Payment
Given the specific values, we can now perform the calculations:
Total Cost = $26,750
Down Payment = $6,750
Interest Rate = 4%
Number of Months = 36 (3 years)
(A) The Amount Financed:
Amount Financed = Total Cost - Down Payment
(B) The Finance Charge:
Finance Charge = Amount Financed * Interest Rate
(C) The Total Installment Price:
Total Installment Price = Amount Financed + Finance Charge
(D) The Monthly Payment:
Monthly Payment = Total Installment Price / Number of Months
(E) Jett's Total Cost:
Total Cost = Total Installment Price + Down Payment
Let's plug in the values and calculate each component:
(A) The Amount Financed:
Amount Financed = $26,750 - $6,750
(B) The Finance Charge:
Finance Charge = Amount Financed * 0.04
(C) The Total Installment Price:
Total Installment Price = Amount Financed + Finance Charge
(D) The Monthly Payment:
Monthly Payment = Total Installment Price / 36
(E) Jett's Total Cost:
Total Cost = Total Installment Price + $6,750
To know more about Monthly Payment visit:
https://brainly.com/question/22993852
#SPJ11